VNswitch 900EA

The VNswitch 900EA Installation and Configuration manual provides comprehensive instructions for installing, configuring, and maintaining the VNswitch 900EA network module. The module is a 12-port 10BaseT switch with an ATM backbone, supporting management via SNMP, Telnet, or a local setup port.

Key sections of the document include:

• Product Introduction: Describes the module's features, including hot-swapping, VLAN support, bridging capabilities, and SNMP management.
• Installation: Covers the installation of ATM Modular PHY (modPHY) cards into the module, as well as installing the VNswitch 900EA module itself into either a DIGITAL MultiSwitch 900 or a standalone docking station (DEChub ONE/ONE-MX).
• Setup Port Cabling: Details the cables and adapters required for connecting to the setup port for device management.
• Configuration: Provides instructions for configuring the module’s IP settings and operating parameters using the installation menu.
• Troubleshooting: Includes guidance on using LEDs to diagnose problems, including power-up sequences and error states.
• Specifications: Contains detailed technical, physical, and acoustical specifications for the module, along with a list of connector types.