/ Hardware Components

Tips on finding documentation for your component

Many components come in multiple variants for different bus systems. They may also have a non-specific set of documentation that contains information pertinent to all variants of the device.

One good example is the DH11 serial interface. This has variants for the UniBus (DHU11), the QBus (DHQ11) and the Q22 bus (DHV11). If you have the Q22 variant you should check both the DHV11 and the DH11 components for documentation.

	Title	Order No
	Parent
	ADC
	Chipset
	CPU
	DAC
	Display
	Enclosures
	Flip Chip Modules
	Memory
	Motherboard
	Multifunction
	Network
	OmniBus
	Other
	Parallel
	PCI
	Power
	QBus
	RTC
	Serial
	Storage
	UniBus
	-3V I.O. Bus Receiver Schematic diagram for the M564 -3V I.O. bus receiver module.	M564-0-I
	10 Mc Pulse Amplifier Schematic diagram for the 10 Mc Pulse Amplifier B602.	B602-0-1
	10-2 Input NAND Gates MI13 This document is a technical schematic for the MII3 10-2 input NAND gate module, intended for test and maintenance.	MII3-0-1
	100 mA Indicator and Relay Driver W051 This document is a technical schematic for the W051 100 mA indicator and relay driver module.	W051-0-1
	100 Ohm Terminator This document is a schematic diagram for the 100 Ohm Terminator G700.	G700-0-1
	100 Ohm Terminator This document is a schematic diagram for the G703 100-ohm terminator module.	G703-0-I
	100 Ohm Terminator G703 A schematic diagram for a 100 Ohm terminator module, part number G703.	G703-0-1
	100mA Solenoid Driver Schematic Schematic diagram for the 4-100mA Solenoid Driver M044.	M044-0-1
	1051-4153 SysModuleSchems	XX-8CAA1-84
	12 Bit Latching Relays Module Engineering Change Order Log An engineering change order log for the M802 12-bit latching relay module used in PDP-8 and PDP-11 systems.	M802
	15 Loads M002 A schematic diagram showing a 15-load resistor circuit configuration.	M002-0-1
	15 Loads M002 Schematic diagram for the 15 Loads M002 circuit module.	M002-0-1
	16 Line to 1 Line Data Selector This document contains a circuit schematic for the M1713 16-line to 1-line data selector.	M1713-0-1
	16K Sense/Inhibit This document contains engineering schematic drawings for the 16K Sense/Inhibit circuit board.	G114-0-1
	16K X-Y Drive Technical engineering documentation and schematics for the 16K X-Y Drive assembly.	G235-0-1
	16K X-Y Drive Technical engineering drawings and parts list for the 16K X-Y Drive circuit board.	CS G235-0-1
	19 Digital Semiconductor Databook Vol 1	XX-194E3-0F
	2 mA Level Terminator G704 Schematic diagram for the 2 mA Level Terminator G704.	6704-0-1
	24 Level Terminators and Thermistor Schematic for a 24-level terminator and thermistor circuit board module.	M969-0-1
	24 Level Terminators and Thermistor Schematic Schematic diagram for the 24 level terminators and thermistor circuit, dated 1971.	M969-0-1
	2T-PMAGD-TF Smart Frame Buffer Module Owner's Guide This document is the owner's guide for the 2T-PMAGD-TF Smart Frame Buffer module, detailing its installation, configuration, and self-test procedures.	EK-PMAGD-IN
	3 Bit Parity Circuit Circuit B130 This is a technical schematic diagram for the 3-bit parity circuit B130 developed by Digital Equipment Corporation in 1964.	B130-0-1
	3-8 Input NAND Gate Schematic diagram for the M139 3-8 input NAND gate integrated circuit module.	M139-0-1
	3-8 Input NAND Gate Schematic This document is a technical schematic for the M139 3-8 Input NAND Gate printed circuit board.	M139-0-1
	3-8 Input NAND-Gates This document provides a technical schematic for 8-input NAND gates, including component parts and wiring configuration.	M119-0-1
	3-Bit Shift Register Schematic diagram for a 3-bit shift register circuit.	RS-C-R220
	4 Bit 16 Word Memory This document is a schematic diagram for the M250 4-bit 16-word memory module.	M250-0-1
	4-Bit Right Shift Parallel Load Register (Dual) M248 Schematic diagram for the M248 dual 4-bit parallel load shift register module.	M248-0-1
	4-Input NAND Gates Schematic diagram for the MI17 4-input NAND gate module.	MI17-0-1
	4-Input NOR Buffers Schematic Schematic diagram of the M617 4-input NOR buffer circuit.	M617-0-1
	4x9 Data Mixer M174 Schematic diagram for the 4x9 Data Mixer M174 module.	M174-0-1
	50 MA Indicator and Relay Driver Schematic diagram for the 50 MA Indicator and Relay Driver M050.	M050-0-1
	50 MA Indicator and Relay Driver M050 Schematic for the M050 50 mA indicator and relay driver module.	M050-0-1
	50 Ohm or Bus Driver Schematic This document is a schematic diagram for the B683 50-ohm or bus driver.	B683-0-1
	6 Bit Adder Schematic This document is a technical schematic for a 6-bit adder circuit by Digital Equipment Corporation.	MI64-0-1
	6 Bit L-R Shift Register M212 This document provides the schematic diagram and parts list for the M212 6-bit left-right shift register circuit.	M212-0-1
	6-4 Input NAND Gates MI17 This document is a schematic diagram for 6-4 input NAND gates (MI17) used by the Digital Equipment Corporation.	MI17-0-1
	6-4 Input Nor Buffers M617 Schematic diagram for the M617 6-4 Input NOR Buffers.	CS-M617-0-1
	6-Bit D/A Comparator and Switch Schematic diagram for a 6-bit digital-to-analog (D/A) comparator and switch module.	CS-6831-0-1
	7 Bit Receiver 4708 Technical manual for the 4708 Receiver, a serial to parallel converter designed for DEC System Module boards.	4708
	8 Track Matrix This schematic provides the circuit diagram for the 8 Track Matrix G681, including a parts list for the diodes and resistors.	G681-0-1
	8-3 Input NAND Gates Schematic diagram for a NAND gate logic circuit module (MI15).	MII5-0-I
	8-3 Input NAND Gates Schematic diagram for the 8-3 input NAND gate circuit.	M115-0-1
	8-Bit Teletype Receiver User Guide This document describes the 4706 8-bit teletype receiver, a serial-to-parallel converter on a DEC System Module board.	4706
	8x6 Data Mixer This document is a schematic diagram for the 8x6 Data Mixer (M178).	M178-0-1
	9FX Motion 331 (PCI) Graphics Option Owner's Guide This document provides installation instructions for the 9FX Motion 331 (PCI) Graphics Option on DIGITAL AlphaServer and workstation products.	EK-V331G-OG
	9FX Vision 330 (PCI) Graphics Option Owner's Guide This guide provides installation instructions for the 9FX Vision 330 (PCI) Graphics Option on Digital AlphaServer and workstation products.	EK-V330G-OG
	A-Diode Board Schematic diagram for an A-Diode board containing a grid of diodes and a thermistor.	C-CS-G610-0-1
	A320 GT40 Display Generator Engineering Change Order Log	A320
	AC Shifter Technical specification sheet for the M227 accumulator shift register module.	M227-1
	Adder Electrical schematic for the B138 Adder module.	B138-0-1
	Adder Gate B167 This document is a technical schematic for the B167 Adder Gate circuit board.	A-PL-B167-0-0
	Address Selector Schematic diagram for the MI05 Address Selector circuit.	MI05-0-1
	AlphaStation Sound Card Hardware Information Hardware installation, configuration, and troubleshooting guide for the AlphaStation sound card.	EK-PBXJA-HI
	Amplifier Boards Technical manual for amplifier board types A990 and A992, covering mounting, power requirements, and trimming instructions.	A-SERIES
	Analog Amplifiers Transistor and Diode Conversion Chart This document provides a schematic and conversion chart for the A214 analog amplifier circuit.	A214-0-1
	Analog Buffer A215 This document is a technical schematic for the Analog Buffer A215 circuit.	A215-0-1
	Analog Data Module for the Professional 300 Series Technical manual for the Analog Data Module (ADM) used for high-accuracy analog data acquisition on Professional 300 Series computers.	ED27007-61
	Analog-Digital Panel This document outlines the technical specifications for the Analog-Digital Panel Type H903, designed for logic laboratory experiments.	H903
	AND-NOR Gate This document is a schematic diagram for the M121 AND-NOR gate printed circuit board.	MI21-0-1
	AND-NOR Gate M121 This document is an electrical schematic diagram for the AND-NOR Gate M121 circuit.	MI21-0-1
	AND/NOR Gates This document is a schematic diagram of the AND/NOR gate circuitry for the MI41 module.	MI41-0-1
	And/Nor Gates MI41 Schematic diagram for the MI41 AND/NOR gate circuit.	A-PL-MI41-0-0
	AND/NOR Gates Module Technical specifications and characteristics for the M129 AND/NOR gate module.	M129-1
	Arpanet Interface Field Maintenance Print Set This document is a field maintenance print set for the ARPANET Interface (AN10), covering logic, wiring, and assembly diagrams.	MP00326
	Async Modem Line Control M753 This document contains the engineering schematic for the M753 Async Modem Line Control unit.	M753-0-1
	ATMworks 750 Installation and Service This document describes how to install and verify the operation of the ATMworks 750 adapter card in an Alpha AXP system.	EK–DGLTA–IN
	Audio Cassette Interface This document is a technical schematic diagram for the PCM-12 audio cassette interface circuit board.	12082
	AX08 Laboratory Peripheral Technical reference and operational flow guide for the AX08 laboratory peripheral used with PDP-8 series computers.	AX08
	B Series Clocks Types B401, B405 Technical specifications and operation guide for B401 Variable Clock and B405 Crystal Clock.	B401-B405
	B-Diode Board Schematic diagram for the G611 B-diode board assembly.	C-CS-G611-0-1
	BA11-F RevN Engineering Drawings	XX-19995-92
	BA11-K Field Maintenance Print Set	XX-DEB82-CC
	Binary to Octal Decoder This document is a schematic diagram for the S151 Binary to Octal Decoder.	S151-O-1
	Binary to Octal Decoder Schematic diagram for the SI51 Binary to Octal Decoder.	S151-0-1
	Binary to Octal Decoder Schematic diagram for the RI51 binary to octal decoder circuit.	RI51-0-1
	Binary to Octal Decoder B152 This document is a technical schematic for the B152 binary to octal decoder circuit.	B152-0-1
	Binary to Octal/Decimal Decoder M161 This document is a technical schematic for the M161 binary to octal/decimal decoder circuit.	MI61-0-1
	Binary Up/Down Counter M211 This document is a technical schematic for the M211 Binary Up/Down Counter module.	M211-0-1
	Binary Up/Down Counter M211 Schematic diagram for the M211 Binary Up/Down Counter.	M211-0-1
	Binary-to-Octal Decoder Technical specifications and truth table for the R151 Binary-to-Octal Decoder.	R151
	Bipolar Output Converter Level Amplifier The W602 is a Bipolar Output Converter module containing three inverting level amplifiers designed to drive EIA standard communication lines.	W602
	Block-Bank Address Card M628 Technical specifications for the M628 Block-Bank Address Card module used in PDP-15 memory multiplexers.	M628-1
	BM873 Restart Loader	B-DD-BM873-0
	Brake Actuator Schematic diagram for a brake actuator circuit used by Digital Equipment Corporation.	69340-0-1
	Brush Drive Assembly Read/Write Board Technical assembly and circuit documentation for a brush drive system and associated read/write board.	7012112-0-0
	Bus Connector Schematic diagram for the M929 bus connector from Digital Equipment Corporation.	M929-0-I
	Bus Connector M929 Schematic diagram for the M929 bus connector.	M929-0-I
	Bus Connector M919 This document is a schematic diagram for the M919 Bus Connector.	M919
	Bus Connector M919 Transistor and Diode Conversion Chart This document provides a schematic for the M919 Bus Connector, including a transistor and diode conversion chart.	M919-0-1
	Bus Control Schematic diagram for the G726 bus control circuit, dated 1969.	G726-0-1
	Bus Control G726 This document is a schematic diagram for the G726 bus control circuit board.	G726-0-I
	Bus Converter Circuit Schematic diagram for the M507 Bus Converter.	M507-C-1
	Bus Converter Circuit Schematic This document provides the circuit schematic for the M507 Bus Converter.	M507-0-1
	Bus Converter M508 This document is an electrical schematic for the M508 Bus Converter, including a parts list and transistor/diode conversion chart.	M508-0-1
	Bus Data Interface Schematic diagram for the M100 Bus Data Interface.	M100-0-1
	Bus Data Interface Schematic for the Digital Equipment Corporation M100 Bus Data Interface.	M100-0-1
	Bus Data Interface Interface MIOI Schematic diagram for the Digital Equipment Corporation Bus Data Interface MIOI.	MIOI-0-1
	Bus Data Interface MIOI Schematic diagram for the MIOI Bus Data Interface, dated 1968.	MIOI-0-1
	Bus Driver This document provides a schematic diagram for the M623 bus driver circuit, including a parts list and transistor/diode conversion chart.	M623-0-1
	Bus Driver Technical data sheet for the R650 Series bus driver, featuring two inverting drivers for logic operations and high-current load applications.	R650
	Bus Driver Schematic This document is a technical schematic for the WIOI bus driver circuit.	WIOI-0-I
	Bus Driver M623 Schematic diagram for the M623 Bus Driver module.	M623-0-1
	Bus Driver Type B684 Technical specifications and operation details for the B684 dual-purpose bus driver module.	B684-$52.00
	Bus Drivers Maintenance Guide This document provides a schematic and parts list for the M629 Bus Driver module.	M629-0-1
	Bus Transceiver This is a schematic diagram for a bus transceiver circuit.	M514-0-1
	Bus Transceiver This document contains the schematic diagram for a bus transceiver.	CS-W132-0-1
	Bus Transceiver Schematic diagram for the M514 bus transceiver module.	M514-0-1
	Bus Transceiver This document is a schematic for a Bus Transceiver circuit, intended for test and maintenance purposes.	CS-W132-0-1
	Bus Transceiver Schematic diagram for the Bus Transceiver module WI22.	WI22-0-I
	Bus Transceiver WI22 Schematic This document is a technical schematic for the Digital Equipment Corporation WI22 Bus Transceiver module.	WI22-0-1
	Cable Assembly Logic/Power Technical assembly drawings and parts lists for various cable configurations, including logic/power and EIA cables, along with a power supply chassis.	7018388-0-0
	Cable Connector G783 Schematic diagram for the G783 cable connector, including a color coding chart and pin connections.	G783-0-I
	Cable Connector G799 This document is a schematic diagram for the G799 cable connector.	G799-0-I
	Cable Connector G799 This document is a schematic diagram for the G799 cable connector.	G799-0-1
	Cable Connector M957 Schematic diagram for the M957 cable connector providing test and maintenance documentation.	M957-0-1
	Cable Connector M957 Maintenance guide Schematic for the M957 cable connector providing test and maintenance information.	M957-0-1
	Cable Connector W033 Schematic diagram for the W033 cable connector, including transistor and diode conversion chart.	W033-0-1
	Cable Connector WO33 This document is a technical schematic for the WO33 cable connector intended for test and maintenance purposes.	W033-0-1
	Cable Interface Board This document is a schematic diagram for a Cable Interface Board, including jumper functions and a parts list.	M970-0-1
	Cable Interface Board Schematic Schematic diagram for the Cable Interface Board (M970-0-1), detailing modem jumper configurations and component parts.	M970-0-1
	Cable Terminator This document provides a schematic diagram for the G795 cable terminator.	G795-0-1
	Cable Terminator Schematic diagram for the M906 cable terminator module.	M906-0-1
	Cable Terminator Wiring diagram for the Cable Terminator G701.	G701
	Cable Terminator Schematic for the W841 Cable Terminator, including parts list and component conversion chart.	W841-0-1
	Cable Terminator G795 Schematic diagram for the G795 cable terminator.	G795-0-1
	Cable Terminator W841 This document is a schematic diagram for the W841 Cable Terminator, intended for test and maintenance purposes.	A-PL-W841-0-0
	Calibrated Timer Control A schematic diagram for the K376 Calibrated Timer Control.	K376-0-1
	Calibrated Timer Control Control K378 Schematic diagram for the K378 calibrated timer control.	K378-0-1
	Calibrated Timer Control K374 This document is a technical schematic for the K374 calibrated timer control component.	K374-0-1
	Carry Pulse Amplifier B Series The B620 is a 10-mc carry pulse amplifier module designed to complement B201 flip-flops in high-speed counting and up-down counter applications.	B620
	Cassette Interface Semiconductor Conversion Chart Schematic diagrams and parts list for the Cassette Interface module.	M8331-0-1
	Center Tap Selector Schematic diagram for the G296 Center Tap Selector.	G296-0-1
	Center Tap Selector Technical module description for the G286 Center Tap Selector used in the RS09 DECdisk Read/Write matrix.	G286-1
	Centertap Selector This document is a technical schematic for the G286 Centertap Selector printed circuit board.	G286-0-1
	Character Generator Instruction Manual Instruction manual for the VA38 20us character generator, an optional hardware component for the Type 338 and 339 programmed buffered displays.	DEC-89-H1 SA
	Circuit Schematic Backplane Assembly Memory This document provides the circuit schematics for the MJ-11 memory backplane assembly.	5411553-0-1
	CL8 Unit Assembly Illustrated Parts Breakdown	EK-CL8-IP-
	Clamp Loads Schematic diagram for the W002 Clamp Loads printed circuit board from Digital Equipment Corporation.	W002-0-1
	Clamped Level Cable Connector This document is a technical schematic for the G796 Clamped Level Cable Connector.	G796-0-1
	Clamped Level Cable Connector Schematic diagram for the G796 clamped level cable connector component.	G796-0-1
	Clamped Loads W005-0-I This schematic provides test and maintenance information for the proprietary W005 Clamped Loads circuit.	W005-0-I
	Clamped Loads WO10-0-I Schematic diagram for the WO10 clamped loads circuit.	WO10-0-I
	Clamped Loads Types W002, W005 Technical specifications for W002 and W005 series clamped loads, providing voltage and current ratings for inverter module applications.	W002-W005
	Clamped Loads WO10 Schematic diagram for the WO10 Clamped Loads circuit board.	WO10-0-I
	Clock Accelerator G903 Schematic diagram for the Clock Accelerator G903 module.	G903-0-1
	Clock and Regulator Schematic diagram for the G859 Clock and Regulator circuit.	G859
	Clock and Regulator Schematic Schematic diagram for the G859 Clock and Regulator circuit.	G859-0-1
	Clock and Skew Delay This is a schematic diagram for the M767 Clock and Skew Delay circuit from 1970.	M767-0-1
	Clock and Skew Delay Technical schematic for the M767 Clock and Skew Delay module.	M767-0-1
	Clock Control Schematic diagram for the M708 Clock Control circuit module.	M708-0-1
	Clock Control M708 This document is a technical schematic for the M708 Clock Control unit, providing logic diagrams and component parts lists.	M708-0-1
	Clock Control Schematic This document is a technical schematic for the G913 clock control circuit board.	CS G913-0-1
	Clock Counter M709 This document is a schematic diagram for the Digital Equipment Corporation M709 Clock Counter module.	A-PL-M709-0-0
	Clock Counter M709 Schematic A schematic diagram for the M709 Clock Counter module, including parts list and signal connection details.	M709-0-1
	Clock R401 Schematic diagram for the R401 clock circuit from Digital Equipment Corporation.	R401-0-1
	Clock Register This document provides a schematic diagram for the M217 Clock Register.	M217-0-1
	Clock-Interrupt Test Program	DIGITAL-7-51-M
	Coaxial Connector Schematic diagram for the M904 coaxial connector.	M904-0-1
	Compaq PowerStorm 300/AGP and 300/PCI Graphics Options Installation Guide This guide covers the hardware installation and software setup for the Compaq PowerStorm 300/AGP and 300/PCI Graphics Options in Compaq Professional Workstations.	EK-PBXAC-IN
	Compaq PowerStorm 600 Graphics Controller Hardware Guide Hardware reference guide for installing and configuring the Compaq PowerStorm 600 Graphics Controller on the Compaq Professional Workstation SP700.	120259-XX1
	Compaq Ultra SCSI Adapter Installation and User's Guide Installation and operation guide for Compaq Ultra SCSI host adapters on OpenVMS VAX systems.	EK-KZMCA-IN
	Comparator Schematic diagram for a transistor-based comparator circuit.	K522-YA-1
	Comparator Type A502 A Series Technical data sheet for the A502 high-speed difference amplifier comparator module.	A502
	Computer Interfacing Accessories and Logic Handbook A 1978-79 catalog of Digital Equipment Corporation computer interfacing accessories, logic modules, and system hardware.	CIA-1
	Connector This document is a schematic diagram for a ribbon cable connector, W023, for test and maintenance purposes.	W023-0-1
	Connector (Coaxial) M904 This schematic provides wiring information for the M904 coaxial connector.	M904-0-1
	Connector (Flexprint) M903 Schematic diagram for the M903 Flexprint connector assembly.	M903-0-1
	Connector Board W025 A schematic diagram for the Digital Equipment Corporation W025 connector board.	W025-0-1
	Connector Board W025 This document is a schematic diagram for the W025 connector board manufactured by Digital Equipment Corporation.	W025-0-1
	Connector W032 Schematic diagram for the W032 connector showing split lug wiring configurations for shielded coaxial cables.	W032-0-1
	Connector W852 This document is a schematic diagram for the W852 connector module.	W852-0-1
	Connector W852 Rev C This schematic provides wiring information for the W852 connector module, intended for test and maintenance purposes.	W852-0-1
	Console Cable Connector M915 Module Technical specification for the M915 console cable connector module used in PDP-15 systems.	M915-1
	Console Control M773 No. 2 Technical specifications for the M773 console control module, covering its function, signal decoding, and power requirements.	M773-1
	Control Cable Module Engineering Drawings Technical engineering drawings and parts list for the RK8-E Control Cable Module.	CS-M993-0-1
	Converter and Cable Connector M850 This document provides a technical schematic for the M850 converter and cable connector.	M850-0-1
	Converter and Cable Connector M850 Schematic A technical schematic for the M850 converter and cable connector dated 1969.	M850-0-1
	Converter-I/O Bus Receiver Module The M500 is an M-series module featuring eight converter circuits that transform negative logic levels into positive TTL levels.	M500
	Core Memory Hardware Accessories Technical specifications for the Type H201 core memory module, which provides 4096 13-bit words of random access memory.	H201
	Core Memory Stack 8K Schematic diagrams for the 8K Core Memory Stack.	5411531-0-1
	Counting Gate Schematic diagram for the Digital Equipment Corporation Counting Gate B166.	B166-0-I
	CP Terminator Card The M910 is a terminator module containing eighteen 68-ohm resistors for the PDP-15 I/O bus.	M910-1
	Crystal Clock This document is a technical schematic for the Crystal Clock M405, designed for test and maintenance purposes.	M405-0-1
	Crystal Clock Schematic diagram for the Digital Equipment Corporation Crystal Clock R405.	R405-0-I
	Crystal Clock Type R405 R Series Technical specifications for the Type R405 crystal clock, which offers frequency range customization and stable pulse generation.	R405
	Crystal Clock B405 Technical schematic and frequency table for the B405 Crystal Clock component.	CS-B-B 405-2
	Crystal Clock M405 This document provides a technical schematic for the Crystal Clock M405 module manufactured by Digital Equipment Corporation.	M405-0-1
	Current Measuring Extender Schematic for the G998 current measuring extender.	6998-0-I
	Current Measuring Extender Schematic for a current measuring extender module (G998) used for Digital Equipment Corporation hardware.	6998-0-1
	Cursor Control	ECSM7000-0-1
	Data Break Interface Maintenance Guide Technical maintenance documentation and schematic diagrams for the Data Break Interface module.	DEC-M2362-0-1
	Data Bus Drivers Technical specifications for the M621 module featuring six open-collector AND-NOR gate drivers.	M621-1
	Data Channel Master Drawing List 60 Hz A master drawing list for the Data Channel (DF10) 60 Hz product, including parts lists, assembly drawings, and wiring diagrams.	DF10-0
	Data Mixer Schematic diagram for the 8x6 Data Mixer M178.	M178-0-1
	Data Selector The M1701 Data Selector module contains two dual 4-line-to-1-line multiplexer integrated circuits used in the FP15 Floating-Point Processor.	M1701-1
	Data Selector M1701 Schematic diagram for the M1701 Data Selector circuit module.	M1701-0-1
	DC Carry Chain S181 Schematic diagram for the DC Carry Chain S181 component module.	A-PL-S181-0-C
	DC Carry Chain R181 This document is a schematic diagram for the DC Carry Chain R181 module.	R181-O-I
	dd11-d	XX-33C1F-35
	DEC Keyboard and Mouse Adapter This document provides the pin assignment specifications for a DEC DB15 to DIN/RJ adapter.	XX-8EE18-C1
	Dec to CTμL Line Driver W6 Schematic diagram for the Digital Equipment Corporation Dec to CTμL line driver circuit W6.	W693-0-I
	Dec to IBM 360 Bus Driver Schematic diagram for the DEC to IBM 360 Bus Driver W692.	W692-0-1
	DEC to IBM 360 Bus Driver W692 This document provides the schematic for the DEC to IBM 360 Bus Driver, model W692.	W692-0-1
	dec-00-pc0a-d	DEC-00-PC0
	dec-00-tu10m-d	DEC-00-TU10
	dec-08-17ta-d	DEC-08-17T
	dec-08-afco-d	DEC-08-AFC
	DEC-11-HLPMA-B-D LPS11-S Laboratory Peripheral System Maintenance Manual	DEC-11-HLPMA-B-D
	Decoding Driver Schematic diagram for the W108-0-1-A decoding driver circuit.	W108-0-1-A
	DECstation RISC Family Graphics Performance Analysis	XX-52C0F-83
	Dectape Jumper Module This document is a schematic diagram for the DECtape Jumper Module G705.	6705-0-1
	Dectape Attenuator This is a schematic diagram for the Dectape Attenuator G706.	6706-0-1
	DECtape Control 550 Master Drawing List Revision K This document is a comprehensive index of all engineering drawings, parts lists, and wiring specifications for the DECtape Control 550 system.	A-550-0-1
	Dectape Control Type TC02 A master drawing list and detailed technical schematics for the Type TC02 DECtape controller.	TC02-0
	DECTape Control Type TC02 Master Drawing List This document provides a master drawing list for the DECTape Control Type TC02, including schematics and assembly information.	D-AD-7005197-0-0
	Dectape Jumper Module G705 Schematic diagram for the G705 Dectape Jumper Module.	G705-0-1
	Deflection Amplifier Schematic This document is a technical circuit schematic for the G912 Deflection Amplifier, intended for test and maintenance purposes.	G912-0-1
	Deflection Amplifier Schematic This document is a technical schematic for the Digital Equipment Corporation A225 Deflection Amplifier.	A225-0-1
	Delay (One Shot) Type R302 Technical guide for the R302 One-Shot Delay multivibrator module.	R302
	Delay Line Schematic diagram for the W301 delay line component.	W301-0-1
	Delay Line W300 Schematic diagram for the W300 Delay Line circuit module.	W300-0-1
	Delay Line M310 Schematic diagram for the M310 Delay Line component.	M310-0-1
	Delay Line M310 Schematic diagram for the M310 Delay Line component.	M310-0-1
	Delay Line B310 This document is a schematic diagram for the B310 Delay Line.	B310-0-1
	Delay Line W300 This document is a schematic diagram for the Delay Line W300, produced by Digital Equipment Corporation in 1964.	W300-0-1
	Delay Line W301 Technical schematic and component specification document for the DEC W301 Delay Line.	W301-0-1
	Delay Lines M312 Technical specifications for the M312 module featuring six delay lines.	M312
	Delay R302 Schematic diagram for the R302 delay circuit board.	R302-0-1
	Delay Timer K Series Technical specifications and usage instructions for the K303 delay timer module in the K series.	K303
	Delay Transmitter Schematic diagram for the Delay Transmitter M768 hardware component.	M768-0-1
	Delay Transmitter Schematic This document is a technical schematic diagram for the Delay Transmitter M768.	M768-0-1
	Delay Type B310 Double Height Board Technical specification and circuit diagram for the B310 double-height delay board containing four 50 nsec delay lines.	B310
	Delay with Pulse Amplifier Type B360 Technical specifications and operational details for the B360 Delay with Pulse Amplifier module.	B360
	Delay with Pulse Amplifier B360 Schematic diagram for the B360 Delay with Pulse Amplifier circuit.	B360-0-1
	DEMFA XMI-FDDI Hardware Functional Spec Rev 1.3 199103	XX-38B35-FC
	Desta Field Maintenance Print Set This document provides a field maintenance print set for the Desta hardware component.	MP-02090-01
	Device Code Select Jumper Board This document provides the schematic and signal pin assignments for the Digital Equipment Corporation M921-0-1 device code select jumper board.	M921-0-1
	Device Code Select Jumper Board This schematic provides pin signal assignments and jumper configurations for the M921-0-1 Device Code Select Jumper Board.	M921-0-1
	Device Selector Schematic M103 This document is a schematic diagram for the M103 Device Selector, detailing its electronic components and circuit design.	M103-0-1
	Device Selector M103 Schematic This is a schematic diagram for the DEC Device Selector M103 circuit, provided for test and maintenance purposes.	M103-0-1
	Difference Amp W532 This is a schematic diagram for the W532 Difference Amplifier produced by Digital Equipment Corporation in 1966.	W532-0-D
	Digit Stack Connector Transistor and Diode Conversion Chart WO14-0-1 This document is a technical schematic and parts list for the Digital Equipment Corporation Digit Stack Connector W014.	WO14-0-1
	Digit Stack Connector WO14 Schematic diagram for the Digit Stack Connector WO14.	WO14-0-1
	Digital 2T-CCMHA-CB Central Office Memory Channel Hub Installation/Service Guide This guide provides instructions for installing, maintaining, and servicing the 2T-CCMHA-CB central office Memory Channel hub.	EK-MCHCO-IN
	DIGITAL ATM 4-Port Modular Line Card	EK-DAGBC-IN
	DIGITAL ATM Modular PHY Cards Installation	EK-DAGGM-IN
	Digital Equipment Corporation (DEC) Technical Documentation Index	EP-FH28C-TE
	DIGITAL Laser Printer LN15 User Manual	XX-A097D-CD
	Digital Laser Printer LN15 Installation Guide (Models LN15P, LN15N-A and LN15N-B)	EK-LN15E-IG
	Digital Logic Handbook This handbook details the principles of DEC Digital Modules, including circuit operation, logic design, and system applications.	A-400B
	DIGITAL PC 3400/5400 System Reference	ER-BOOWW-UA
	DIGITAL PC 5500 System Reference	ER-B97WW-UA
	Digital PCI Development Platform User's Guide User's guide for the DIGITAL PCI Development Platform reconfigurable hardware module.	EK-PAMP1-UG
	DIGITAL PCI32-VME64 Adapter Hardware Owner's Guide This guide provides instructions for the configuration and installation of the DIGITAL PCI32-VME64 adapter.	EK-DWP64-UG
	Digital PowerStorm 4D30T Graphics Option Texture Memory Upgrade Installation Procedure Procedure for upgrading the texture memory DIMM on the Digital PowerStorm 4D30T graphics option.	EK-PBXGD-IP.A01
	DIGITAL PowerStorm 4D51T GFX Graphics Option Installation Guide	EK-51GFX-IN
	Diode Network An engineering schematic drawing for a diode network component.	CS-B-ROOI
	Diode Clamp M907 Schematic diagram for the M907 Diode Clamp.	M907-0-1
	Diode Clamp M907 Schematic diagram for the M907 Diode Clamp module.	M907-0-1
	Diode Cluster A schematic diagram showing the configuration of a R002 diode cluster.	R002-O-I
	Diode Cluster A schematic diagram showing the configuration of a D664 diode cluster.	R002-0-I
	Diode Gate Schematic for the Digital Equipment Corporation Diode Gate (B113) circuit.	B113-0-1
	Diode Gate Schematic diagram for the B141 Diode Gate circuit.	B141-0-1
	Diode Gate Schematic diagram for the B168 Diode Gate module.	B168-0-1
	Diode Gate Schematic diagram for the B172 diode gate module.	B172-0-1
	Diode Gate This schematic diagram details the circuit design for the BI35 diode gate component.	B135-0-1
	Diode Gate Schematic diagram for a Diode Gate circuit board.	B117-0-1
	Diode Gate Schematic diagram for the RI23 diode gate circuit.	RI23-0-1
	Diode Gate This document provides a schematic diagram for the R141 Diode Gate, used for test and maintenance purposes.	R141-0-1
	Diode Gate B163 Schematic diagram for the Digital Equipment Corporation B163 diode gate circuit.	B163-0-1
	Diode Gate S111 Schematic diagram for the S111 Diode Gate component from Digital Equipment Corporation.	S111-0-1
	Diode Gate B133 This document is a circuit schematic for the Diode Gate B133 module.	B133-0-1
	Diode Gate B135 A schematic diagram for the B135 diode gate circuit, dated 1966.	B135-0-I
	Diode Gate B136 Schematic diagram for the DIODE GATE B136 logic module.	B136-0-1
	Diode Gate B142 This document provides the schematic and component information for the Digital Equipment Corporation Diode Gate B142.	B142-0-1
	Diode Gate B173 Schematic diagram for the B173 Diode Gate.	B173-0-1
	Diode Gate B17I Schematic diagram for the B17I Diode Gate, a component for test and maintenance purposes.	B17I-0-1
	Diode Gate Diode Gate This document is a schematic diagram for the Diode Gate R113, designed for test and maintenance purposes.	R113-0-1
	Diode Gate Driver This document provides the schematic diagram and parts list for the B685 Diode Gate Driver.	B685-0-1
	Diode Gate Maintenance Guide This document provides a schematic diagram for the Diode Gate B134, including transistor and diode conversion charts.	B134-0-1
	Diode Gate Maintenance Guide This document provides the schematic and maintenance information for the R111 Diode Gate board.	R111-0-1
	Diode Gate S123 This document is a schematic diagram for the S123 diode gate circuit produced by Digital Equipment Corporation in 1967.	S123-0-1
	Diode Gate Schematic Schematic diagram for the BI37 Diode Gate circuit module.	BI37-0-1
	Diode Gate SIII Schematic diagram for the SIII Diode Gate.	SIII-0-1
	Diode Gate BII5 Schematic diagram for the Diode Gate BII5 circuit module.	BII5-0-1
	Diode Inverter B165 This document is a technical schematic for the B165 Diode Inverter, including a transistor and diode conversion chart.	BI65-0-1
	Diode Network This document is an engineering schematic for a diode network (RO01).	CS-B-ROO1
	Disc Read Amp and Slice Schematic diagrams for the G085 Disc Read Amp and Slice circuit.	G085-0-1
	Disc Writer G284 Schematic diagram for the G284 Disc Writer unit from 1967.	G284-0-1
	Disk Read Amplifier G085 Technical specification and block schematic for the G085 Disk Read Amplifier module.	G085-1
	Disk Shift Register Schematic diagram for the M233 Disk Shift Register module.	M233-0-I
	dl11	XX-81BAD-FC
	DMA20 Memory Bus Adapter Unit Description This document provides a technical description of the DMA20 Memory Bus Adapter used in the KL10 system.	EK-DMA20-UD-002
	dmf32	XX-7AE0B-2C
	dms11-d	XX-AEE2E-5A
	DMV11 Synchronous Controller User's Guide	EK-DMV14-UG
	dpv11	XX-B9BDB-12
	DQ11 RevL Engineering Drawings Aug75	XX-42F13-7D
	Drive Logic This document contains the schematics, component lists, and board layout for the Drive Logic circuitry of a Digital Equipment Corporation storage system.	5412175-0-0
	Drive Logic This document contains a parts list and engineering schematic diagrams for the Drive Logic module.	CS-5414025-0-1
	Drive Logic A parts list and engineering schematic diagrams for the Drive Logic module.	5414025-0-DRP
	Driver K683 This document is a technical schematic for the K683 driver circuit board.	K683-0-1
	DSH32 Synchronous/Asynchronous Serial Line Option Preliminary	EK-283AA-AD
	DSV11 Synchronous Device Driver Manual	AA-JG79B-TE
	DSV11-SF Communications Option Installation Guide This guide provides step-by-step instructions for installing the DSV11-SF communications option in a BA200 series enclosure.	EK-DSV11-IN-001
	Dual AC-Coupled Difference Amplifiers Type W532 W Series Technical specifications and operational details for the W532 Dual AC-Coupled Difference Amplifier module.	W532
	Dual Binary to Decimal Decoder This document is a technical schematic for the M163 Dual Binary to Decimal Decoder.	M163-0-1
	Dual Binary to Decimal Decoder This document is a schematic diagram for the MI63 Dual Binary to Decimal Decoder circuit.	MI63-0-1
	Dual Flip Flop Schematic This document is a technical schematic for the R202 Dual Flip Flop circuit module.	R202-0-1
	Dual Motor Voltage Control Schematic for the G847 dual motor voltage control circuit.	G847-0-1
	Dual Motor Voltage Control G847	DEC-00-HRTC-D
	Dual R-S Flip-Flop B212 This document is a circuit schematic for the B212 Dual R-S Flip-Flop module, including a parts list and revision information.	CS-B212-0-1
	Dual Rectifying Slicer Type W533 Technical specification for the W533 dual rectifying slicer module used to convert amplified magnetic sense signals into positive DEC pulses.	W533
	Dual SCSI Module Owner's Guide This guide covers the operation, jumper configuration, installation, and testing of the PMAZC-AA dual SCSI TURBOchannel module for Alpha AXP systems.	EK-SCSIB-OG
	dup11mm3	XX-B9DAC-D3
	dup11op1	XX-3AC42-16
	dw780td1	XX-4A32A-F9
	DWLMA XMI PIU Installation Guide This guide covers the installation and verification procedures for the XMI PIU in VAX 7000/10000 and DEC 7000/10000 AXP systems.	EK-DWLMA-IN.001
	DWMVA VME Adapter Installation Guide This document provides instructions for installing the DWMVA VME adapter in VAX 6000 and VAX 7000/10000 computer systems.	EK-DWMVA-IN-002
	DWMVA VME Adapter Technical Manual Technical manual for software developers for the DWMVA VME adapter used in VAX 6000 systems.	EK-DWMVA-TM-001
	DWTVX-Ax VME I/O Subsystem Pocket Service Guide Service guide for the DWTVX-Ax VME I/O subsystem providing installation, configuration, and diagnostic procedures.	EK-DWTVX-PS.A01
	DZS11-EA Field Maintenance Print Set	MP01165
	EBVXG Graphics Module User's Guide This guide provides instructions for the configuration and installation of the EBVXG graphics module for DIGITAL AXPvme single-board computers.	EK-EBVXG-UG.B01
	Edge Connector This document is a schematic diagram for the H851 edge connector.	H851-0-1
	Edited Option / Module List	OL0501-ODP
	EIA Level Converter This document is a schematic diagram for an EIA level converter circuit.	M5940-0-4
	EIA Level Converter Schematic diagram of a Digital Equipment Corporation EIA level converter circuit.	M5940-0-4
	Eight Inverters Schematic diagram for the K138 eight inverters circuit board.	K138-0-1
	ELSA GLoria Synergy Graphics Controller Installation Guide This guide provides instructions for the installation of the ELSA GLoria Synergy Graphics Controller in Compaq workstations.	EK-COMGS-IG
	Exclusive Or Module Type R131 Technical data sheet for the R131 Exclusive OR module, used for comparing binary patterns.	R131
	Fault Protection Board Schematic This document is a schematic diagram for the G838 Fault Protection Board, dated 1970.	G838-0-1
	Field Installation and Acceptance Procedure Field Installation and Acceptance Procedure DKC8-A This document outlines the field installation and acceptance procedure for the DKC8-A.	EK-DKC8A-IN-001
	Field Maintenance Print Set 4K/2K PROM This document is a field maintenance print set for the 4K/2K PROM (MRV11-A) board.	MP00066
	Field Maintenance Print Set Field Maintenance 4K/2K PROM Technical print set for the MRV11-A field maintenance of 4K/2K PROM modules.	D-CS-M7942-0-1
	Filtered Differential Amplifier This is a schematic diagram for a filtered differential amplifier circuit.	G589-0-1
	Filtered Differential Amplifier Schematic for a filtered differential amplifier based on the MC1520G operational amplifier chip.	G589-0-I
	Filtered Differential Amplifier G590 Schematic diagram for the G590 Filtered Differential Amplifier printed circuit board.	G590-0-1
	Filtered Differential Amplifier Schematic This document is a technical circuit schematic for the Filtered Differential Amplifier G590, designed by Digital Equipment Corporation in 1969.	G590-0-1
	Flexible Disk Data Storage Systems Service Manual This service manual provides theory of operation and service instructions for the DSD 440 and DSD 480 Flexible Disk Data Storage Systems.	040023-01
	Flexprint Cable Connector Schematic diagram for a Flexprint cable connector.	M926-0-I
	Flexprint Cable Connector Schematic diagram for a Flexprint cable connector.	M926-0-I
	Flexprint Cable Connector Schematic diagram for the M901 Flexprint Cable Connector.	M901-0-I
	Flexprint Cable Connector M901 This document is a schematic diagram for the M901 Flexprint Cable Connector.	M901-0-1
	Flexprint Cable Connector M922 Schematic diagram for the M922 Flexprint Cable Connector.	M922-0-I
	Flexprint Cable Connector M922 This document provides a schematic for the M922 Flexprint Cable Connector.	M922-0-1
	Flip Flops Technical specifications and operational guide for K-Series K210, K220, and K230 flip-flop modules.	408
	Flip-Flop B211 Schematic diagram for the B211 Flip-Flop logic module.	B211-0-1
	FM Address Decoder B199 This document provides the schematic for the B199 FM Address Decoder board, including its revision history, component specifications, and circuit diagrams.	B199-0-1
	FM Module B250 Transistor & Diode Conversion Chart Schematic and component information for the FM Module B250 transistor and diode conversion unit.	B250-0-1
	Forward B.O.T. Timer This document is a technical schematic for the M7670 Forward B.O.T. Timer module, including transistor and diode conversion charts.	M7670-0-1
	Forward B.O.T. Timer Schematic This document is a technical schematic for the M7670 Forward B.O.T. Timer module, including a transistor and diode conversion chart.	M7670-0-1
	Four Flip-Flops B214 Schematic diagram for the B214 four flip-flop circuit module.	B214-0-1
	Four Input Multiplexer Switch This document is a technical schematic for a four-input multiplexer switch (A124).	A124-0-1
	Four Input Sense Amp Maintenance Guide This document provides a schematic and parts list for the Four Input Sense Amplifier (GO22).	6022-0-1
	Four Input Sense Amp Maintenance Guide Schematic diagram for the G022-0-1 Four Input Sense Amplifier.	G022-0-1
	FP11-A Field Maintenance Print Set	MP00189
	Front Bay Hard Drive Installation Installation instructions for mounting a 3.5-inch hard drive into a 5.25-inch front bay.	EK-FBHDA-IN
	Front Control Board This document contains the engineering schematics for the front control board assembly.	5409557-0
	FullVideo Supreme Owner's Guide This guide provides information on the FullVideo Supreme PCI module for Alpha workstations, including features, installation, and hardware specifications.	EK-FVIDO-OG.A01
	FullVideo Supreme and FullVideo Supreme JPEG Owner's Guide This guide covers the installation and hardware specifications for the FullVideo Supreme and FullVideo Supreme JPEG multimedia modules for Alpha PCI-based systems.	EK–FJPEG–OG
	Function Control Schematic diagram for the M769 function control module.	M769-0-1
	Function Control M769 This document is a schematic diagram for the M769 Function Control module.	M769-0-1
	G285 Series Switch Technical specifications for the G285 series switch, a single-height module containing two 4-inch AND gates for use in read/write matrices.	G285-1
	G613 X Diode Matrix Technical description of the G613 module which functions as an 8 x 8 two-way crosspoint switching matrix using 256 diodes.	G613-1
	G681, G711, G775 DECdisk Modules Technical specifications for G681, G711, and G775 DECdisk modules including the 8 Track Matrix, Terminator Board, and Indicator Panel.	G681, G711, G775-1
	G772 System Unit Harnass	XX-0B70D-30
	G772 System Unit Harness	XX-DFA23-EC
	Gate Expander Schematic diagram for the Gate Expander K003 from Digital Equipment Corporation, dated 1967.	K003-0-1
	Gate Expander K026 Schematic diagram for the K026 gate expander hardware component.	K026-0-I
	Gating Module MI69 Schematic This document provides the circuit schematic for the Gating Module MI69.	MI69-0-1
	GT48A Engineering Drawings Technical engineering drawings for the Digital Equipment Corporation GT48A Graphics System.	GT48A
	Half Binary to Octal Decoder B156 Schematic diagram for the B156 Half Binary to Octal Decoder circuit from 1966.	B156-0-1
	HALF BINARY TO OCTAL DECODER B156 A schematic diagram for the Digital Equipment Corporation B156 half binary to octal decoder module.	B156-0-1
	Half Binary-to-Octal Decoder Series B Technical data sheet for the B155 Half Binary-to-Octal Decoder module.	B155
	High Impedance Follower W510 This is a 1965 schematic for the Digital Equipment Corporation High Impedance Follower W510 circuit, intended for test and maintenance purposes.	W500-0-1
	HSC50 Installation Manual	EK-HSC50-IN
	I.O. Bus Receiver Schematic This document provides the schematic and parts list for the M564 -3V I.O. Bus Receiver.	M564-0-1
	I.O. Bus Reset This document is a schematic for the MG66 I.O. Bus Reset module used for test and maintenance purposes.	MG66
	I.O. Bus Reset MG66 Schematic diagram for the I.O. Bus Reset MG66 circuit board.	MG66
	I.O. Connector W850 Schematic diagram for the W850 I.O. Connector module.	W850-0-1
	I/O Bus Drivers Module The M622 is an M-series module containing eight I/O bus drivers designed for the PDP-15 system.	M622
	I/O Bus Receiver M510 Technical specifications for the M510 I/O bus receiver module designed for PDP-15 systems.	M510-1
	I/O Bus Receiver Circuit This document provides a schematic diagram for the W107 I/O bus receiver circuit used in Digital Equipment Corporation hardware.	W107-0-1
	I/O Bus Receiver Circuit W107 Schematic diagram for the W107 I/O Bus Receiver circuit, detailing transistor and diode configurations.	W107-0-1
	I/O Bus Terminator Schematic diagram for an I/O bus terminator module.	G7001-0-1
	I/O Bus Terminator Technical schematic and parts list for the I/O Bus Terminator #3 used in the PDP-10 computer system.	DCS67002-0-1
	I/O Bus Terminator This document is an electrical schematic and parts list for the I/O Bus Terminator module.	G7006-0-1
	I/O Bus Terminator 2 Schematic diagram for an I/O bus terminator module.	G7004-01
	I/O Bus Terminator 1 This document is an electrical schematic diagram for a PDP-10 I/O Bus Terminator 1.	DCS-G7000-0-1
	I/O Bus Terminator 2 Schematic diagram for an I/O Bus Terminator module.	G7001-0-1
	I/O Bus Terminator 1 Schematic diagram for a Digital Equipment Corporation I/O bus terminator.	G7003-0-1
	I/O Bus Terminator 4 This document contains the schematic diagram and parts list for the I/O Bus Terminator 4 module.	G7006-0-C
	I/O Cable Engineering drawing and wire table for an I/O cable (BC08J) used with Digital Equipment Corporation systems.	BC08J-0-0
	I/O Cable This document provides the technical specifications and wiring diagram for an I/O cable (model BC08J).	BC08J-0-0
	I/O Cable I/O Cable BC80M Technical engineering drawings and wire table for the BC80M I/O cable.	BC80M-0-0
	I/O CABLE (BC80M) This document provides assembly and wiring instructions for the BC80M I/O cable.	BC80M-0-0
	IBM 360 to DEC Bus Receiver This document is a schematic diagram for the W592 receiver module, designed to interface IBM 360 signals with the DEC bus.	W592-0-I
	IBM 360 to DEC Bus Receiver W592 This document is a technical schematic for the W592 IBM 360 to DEC Bus Receiver circuit board, dated 1967.	W592-0-1
	IBM N Line to DEC Converter Technical module documentation for the W590 IBM N line to DEC converter, providing input, output, and power specifications.	W590
	Indicator and Relay Driver 100 ma W Series Technical specifications and operational details for the W051 100ma Indicator and Relay Driver module.	W051
	Indicator Board KI 10 Schematic diagram for the KI 10 indicator board.	M948-0-1
	Indicator Cable Connection Schematic for the indicator cable connection M949, including a parts list and transistor-diode conversion chart.	M949-0-1
	Indicator Cable Connection This document is a technical schematic for the M950 indicator cable connection, featuring transistor and diode conversion charts.	M950-0-1
	Indicator Cable Connection Schematic for the M949 Indicator Cable Connection.	M949-0-1
	Indicator Cable Connection Schematic This document provides a schematic diagram for the Indicator Cable Connection, module M950.	M950-0-1
	Indicator Cable Connector Indicator Cable Connector W020 This is a wiring diagram for the W020 indicator cable connector, showing resistor connections.	CS-B-W020
	Indicator Cable Connector Schematic This document is a schematic diagram for the Indicator Cable Connector WO12.	WO12-0-1
	Indicator Cable Connector W250 Schematic diagram for the W250 Indicator Cable Connector.	W250-0-1
	Indicator Cable Connector W020 This document is a technical schematic diagram for the W020 indicator cable connector, detailing its wiring and resistor configuration.	CS-B-W020
	Indicator Cable Connector W250 Schematic diagram for the W250 indicator cable connector.	W250-0-I
	Indicator Cable Connector WO12 Schematic Schematic diagram for the WO12 indicator cable connector.	WO12-0-1
	Indicator Driver This document provides a schematic diagram for the Indicator Driver W050-3 circuit board.	W050-3
	Indicator Panel Connector Card The G775 Indicator Panel is a connector card designed for logic level isolation and driving indicator bulbs.	G775-0-1
	Indicator Panel Connector Card Schematic diagram for the G775 Connector Card, an indicator panel component by Digital Equipment Corporation.	G775-O-1
	Indicator Switch Panel This document describes the H902 Indicator Switch Panel, used for control and observation in a Logic Laboratory.	H902
	Inhibit Driver Schematic diagram for the G207 Inhibit Driver circuit.	G207-0-1
	Inhibit Driver Schematic diagram for the G228 Inhibit Driver module.	G228-0-1
	Inhibit Driver Circuit Schematic This document provides the circuit schematic for the Inhibit Driver G207.	G207-0-1
	Inhibit Driver G228 This document is a technical circuit schematic for the Inhibit Driver G228 module.	G228-0-1
	Input DC Sense Amplifier This document is a technical circuit schematic for the G005 4-input DC sense amplifier.	G005-0-1
	Input DC Sense Amplifier Schematic This document is a technical schematic for the G005 input DC sense amplifier.	G005-0-1
	Input Network W701-0-1 Schematic diagram for the W701 Input Network.	W701-0-1
	Input Network W701 This document is a schematic diagram for the W701 input network.	W701-O-1
	Installing an HSZ70 Cache Module This document provides instructions for replacing the cache module in a Digital HSZ70 array controller for both single and dual-redundant configurations.	EK-70CAH-IN
	Installing HSZ70 SIMMs Installation and maintenance guide for adding or replacing memory modules in HSZ70 cache modules.	EK-70SIM-IN
	Installing HSZ80 DIMMs User Guide This document provides step-by-step instructions for adding or replacing DIMM memory modules in HSZ80 array controllers, covering both single and dual-redundant configurations.	EK-Z8DIM-IN
	Installing the MXV11-B2 ROM Set Installation Instructions Instructions for installing the MXV11-B2 ROM set on the MXV11-B multifunction module and the MRV11-D universal PROM module.	EK-MXVB2-IN-001
	Integrating One Schematic diagram for the Integrating One module.	M308-0-1
	Integrating One Shot Schematic diagram for the M307 Integrating One Shot circuit module.	M307-0-1
	Integrating One Shot Technical schematic diagram for the Integrating One Shot circuit.	M3070-0-1
	Integrating One Shot This is a schematic diagram for an integrating one-shot circuit, including a parts list.	M3070-0-1
	Integrating One Shot Schematic This document provides the schematic and maintenance information for the M307 Integrating One Shot circuit module.	M307-0-1
	Integrating One Shot M308 Transistor and Diode Conversion Chart Technical schematic and parts list for the M308 Integrating One Shot module.	M308-0-1
	Integrating One-Shot Schematic Schematic diagram for the R303 Integrating One-Shot circuit module.	R303-0-1
	Intensity Amplifier W682 Schematic diagram for the W682 Intensity Amplifier circuit used by Digital Equipment Corporation.	W682-0-1
	Interconnecting Cables Data Technical assembly drawings and packaging instructions for interconnection cabling systems.	7010824-0-0
	Interrupt Control M7820 This document is a schematic diagram for the M7820 interrupt control module from Digital Equipment Corporation.	M7820-0-1
	Interrupt Control M7820 This document is a technical circuit schematic for the M7820 Interrupt Control board.	M7820-0-1
	Interrupt Control Parts List This document contains engineering drawings and a parts list for the M7821 Interrupt Control module.	M7821-0-1
	Inverter B105 This document is a schematic diagram for the B105 Inverter circuit, providing detailed electrical connections for testing and maintenance.	B105-0-1
	Inverter Inverter Schematic diagram for the Inverter BIO4 circuit board.	BI04-0-1
	Inverter B I O 4 This document is a schematic diagram for the B I O 4 inverter circuit.	BI04-0-1
	Inverter MIII This document is a schematic for the MIII Inverter circuit board.	MIII-0-1
	Inverter MIII Schematic This document provides the schematic and parts list for the MIII inverter circuit.	A-PL-MIII-0-C
	Inverter R107 Schematic This document is a technical schematic for the R107 inverter circuit.	R107-0-1
	Inverters B Series Technical data sheet for B series inverter modules, including models B104, B105, B123, and B124.	B-SERIES
	Inverting Gate This is a schematic diagram for a 1967 Digital Equipment Corporation inverting gate circuit.	K113-0-1
	IO Bus Driver Schematic diagram for the M664 IO Bus Driver module.	M664-0-1
	IO Bus Driver M664 Schematic diagram for the M664 IO Bus Driver module from Digital Equipment Corporation.	M664-0
	IO Bus Driver W101 Schematic Diagram This document provides the schematic diagram for the W101 IO Bus Driver, intended for test and maintenance purposes.	W101-0-1
	IO Device Control Schematic diagram for an IO Device Control module (MT7100).	M7100-0-1
	IO Device Control This is a schematic diagram for the M7100 IO device control module.	M7100-0-1
	Isolated AC Switch This document contains the schematic diagram and parts list for the K614 isolated AC switch circuit.	K614-0-1
	Isolated AC-DC Switch W Series Technical data sheet for the W080 isolated AC-DC switch module.	W080
	Jam Flip-Flop Schematic Schematic diagram for the JAM Flip-Flop module B213.	B213-0-1
	Jumper/Extender Board M941 This document provides a schematic diagram for the M941 Jumper/Extender board.	M941-0-1
	Jumper/Extender Board M941 Schematic diagram for the M941 Jumper/Extender board.	M941-0-1
	KC759 Options User Guide	EK-KCT50-UG
	KDA70 Proto Schems BRD1 198810	XX-E55E0-14
	KDA70 Proto Schems BRD2 198810	XX-BA67C-10
	KE11-B Arithmetic Unit Engineering Drawings	XX-036B1-E9
	KE8-E Extended Arithmetic Element Engineering Drawings Engineering drawing set for the KE8-E extended arithmetic element for PDP-8 systems.	KE8-E
	KFESA DSSI Adapter Installation and User's Guide This guide provides installation and operation instructions for the KFESA EISA-to-DSSI host adapter module.	EK-KFESA-OP.A01
	KFESB DSSI Adapter Installation and User's Guide This guide provides instructions for installing and configuring the KFESB EISA-to-DSSI host adapter for EISA-based systems.	EK-KFESB-OP.A01
	KFPSA DSSI Adapter Installation and User's Guide This guide provides instructions for installing the KFPSA PCI-to-DSSI host adapter and configuring DSSI device parameters.	EK-KFPSA-OP.A01
	KI-10 Indicator Driver Schematic Schematic diagram for the M947 KI-10 Indicator Driver module, featuring a parts list and transistor/diode conversion information.	M947-0-1
	KI-10 Indicator Driver M947 Schematic diagram for the M947 KI-10 Indicator Driver module.	M947-0-1
	KI10 Indicator Board Schematic diagram for the KI10 indicator board used for test and maintenance.	M948-0-1
	KMV1A Programmable Communications Controller User Guide	EK-KMV1A-UG
	KMV1A-S Release Note This release note details a temporary inclusion of extender cables with certain KMV1A interface packages due to the late availability of right angle cables.	KMV1A-S
	KW12 Clock Input Synchronizer Schematic Schematic diagram for the KW12 Clock Input Synchronizer (M719) module.	M719-0-1
	KY11-LA FMPS MP017	MP00017
	KZPDA-AA PCI Adapter Board Installation and Configuration This document provides installation and configuration instructions for the KZPDA-AA PCI adapter board in various AlphaServer systems.	EK-KZPDA-IN
	l0008	XX-112E4-F5
	l0016	XX-FE281-FA
	Laser IO Port Module (IOP) Functional Specification Preliminary V1.1	XX-7F18D-15
	Latched Register Driver M362 Schematic This document is a technical schematic for the M362 Latched Register Driver module, intended for test and maintenance purposes.	M362-0-1
	LAX34-AL FMPS MP751	MP00751
	LAX34-JL FMPS MP-01209-	MP-01209-00
	LAX34-KL FMPS	MP00752
	LAX34-PL FMPS MP739	MP00739
	Level Amplifier Level Amplifier Schematic diagram for the W513 Level Amplifier, designed by Digital Equipment Corporation in 1965.	W513-0-1
	Level Amplifier W513 Schematic diagram for the W513 level amplifier, designed by Digital Equipment Corporation in 1965.	W513-0-1
	Level Converter Schematic Schematic diagram for the M051 Level Converter module.	A-PL-M050-0-0
	Level Converter Schematic This document is a technical schematic for the M051 level converter module.	M051-0-1
	Level Terminator This document provides an engineering schematic and parts list for a level terminator module.	G766-0-1
	Level Terminator Electrical schematic drawing for a level terminator module.	G766-0-1
	Linc Tape Register M222 Schematic This document is a schematic diagram for the Digital Equipment Corporation Linc Tape Register M222.	M222-0-1
	Line I/O Control M750 Schematic for the M750 Line I/O Control circuit board.	M750-0-1
	Line I/O Control M750 This document is a technical schematic for the Line I/O Control M750, providing circuit details for test and maintenance purposes.	M750-0-1
	Line Register and Control M751 Schematic diagram for the M751 line register and control module.	M751-0-1
	Line Register and Control M75I Schematic diagram for the M75I Line Register and Control logic.	M75I-0-1
	LK201 Field Maintenance Print Set	XX-20134-F6
	LK201 Keyboard Schematic Technical schematic diagrams and matrix layout for the LK201 keyboard.	LK201
	LK201 Schematic	MP01395
	Load Module Instructions Guidelines for installing or removing the 2T-LDMOD-AA load module in a Dialogic Telco Platform chassis.	EK-ASIPP-AD
	Look-Ahead Logic for 74181 Schematic for look-ahead logic circuit based on 74181 components.	M191-0-1
	Lptser - Line Printer Service Routine	XX-BB670-91
	LT33 print set	XX-E7290-F0
	M214 Data Storage Register Technical specifications for the M214 module, including input, output, and power characteristics.	M214-1
	M220B Engineering Schematic An incomplete engineering schematic drawing for the M220B hardware component.	M220B
	m3108-0-0	XX-6FBC8-22
	M776 Reader Register Technical specifications for the M776 Reader Register module, used to interface the PC05 Paper Tape Reader with the PDP-15.	M776-1
	m8750	XX-B9090-C3
	M902 Terminator Card Technical specifications for the M902 terminator card used in PDP-15 memory bus systems.	M902-1
	M9301 eprom adapter	XX-FD891-37
	Mag. Tape Read Amp. This document is a circuit schematic for the G084 magnetic tape read amplifier.	G084-0-1
	Manchester Reader Writer Schematic This document provides the schematic diagram and parts list for the Manchester Reader Writer G882.	CS-G882-0-1
	Manchester Reader/Writer G888 Rev. E This document is a schematic diagram for the Manchester Reader/Writer G888, dated 1969.	G888-0-1
	Manchester Reader/Writer Schematic Schematic diagram for the Manchester Reader/Writer G888, used for test and maintenance purposes.	G888-0-1
	Manual Timing Generator M700 This document is a technical schematic for the M700 Manual Timing Generator.	M700-0-1
	Manual Timing Generator M700 This document provides a schematic diagram for the M700 Manual Timing Generator.	M700-0-1
	Master Slice Control Schematic and parts list for the G023 Master Slice Control circuit.	G023-0-1
	Master Slice Control Schematic This document is a schematic diagram for the Master Slice Control G008 circuit.	G008-0-1
	Master Slice Control Schematic This document is a schematic diagram for the Master Slice Control G023, intended for test and maintenance purposes.	G023-0-1
	Master Slice Control Schematic Schematic diagram for the Master Slice Control (G008), dated 1965 by Digital Equipment Corporation.	G008-0-1
	MB20 Internal Memory Unit Description A technical description of the MB20 internal memory system, including its basic operation, addressing modes, and circuit-level logic for the KL10 system.	EK-MB020-UD-001
	MDECS-AA 256K x 22 MOS Memory System Field Maintenance Print Set Field maintenance documentation and schematics for the MDECS-AA 256K x 22 MOS memory system.	B-TC-MDECS-AA-1
	Memory Back Plane Technical engineering drawing for a 32K x 16-18 memory backplane.	5410345-0-1
	Memory Bus CP Terminator Card This document describes the M911 memory bus terminator card for the PDP-15, which contains eighteen 100-ohm terminating resistors.	M911-1
	Memory Channel Service Information Service and maintenance information for PCI Memory Channel subsystems and FRU replacement instructions.	EK-PCIMC-SV.A01
	Memory Channel Service Information This document provides service and maintenance information for Digital Equipment Corporation's PCI Memory Channel subsystems.	EK-PCIRM-SV
	Memory Channel User's Guide Hardware installation, configuration, and verification guide for the Memory Channel cluster system.	EK-PCIRM-UG.B01
	Memory Channel User’s Guide This document provides hardware installation, configuration, and verification procedures for the Memory Channel cluster.	EK–PCIMC–UG
	Memory Channel Release Note This release note specifies that OpenVMS systems with MEMORY CHANNEL clusters must currently use only CCMAA-AA PCI adapters.	EK-PCIRM-RN
	Memory Common Driver G212 Schematic diagram for the G212 Memory Common Driver circuit.	G212-0-1
	Memory Common Driver G212 Schematic diagram for the G212 Memory Common Driver circuit.	G212-0-1
	Memory Detection M720 This document is a schematic diagram for the M720 memory detection module manufactured by Digital Equipment Corporation in 1967.	M720-0-1
	Memory Detection M720 This document is a schematic diagram for the M720 Memory Detection unit.	M720-0-1
	Memory Extension Control Schematic diagrams for the MC81 memory extension control hardware module.	D-BS-MC8I-0-1
	Memory Levels Gates Schematic diagram for the GIO3 memory levels and gates logic circuit.	G103-0-1
	Memory Levels and Gates Schematic diagram for G103 memory levels and gates logic circuit.	G103-0-1
	Memory Mounting Board Schematic diagram for the G609 Memory Mounting Board.	G609
	Memory Option Installation Card Quick reference guide for installing MS340-XX memory options in AlphaServer/AlphaStation DS20 and DS20E systems.	EK-MS340-IN
	Memory Option Card Installation This document provides instructions for installing 3X-MS310-XX memory options in AlphaServer DS10 and AlphaStation VS10 systems.	EK-DS10M-IN
	Memory Receiver This document provides a schematic diagram for a Memory Receiver circuit.	M565
	Memory Receiver Schematic for a memory receiver module used for test and maintenance purposes.	M565-0-1
	Memory Selector Schematic diagram for the RS-C-G209 memory selector circuit.	RS-C-G209
	Memory Selector Schematic diagram for the G221 Memory Selector circuit, dated 1967.	G221
	Memory Selector Schematic diagram for the G222 Memory Selector module.	G222-0-1
	Memory Selector 6219 Schematic diagram for the Memory Selector circuit board G2J9.	6219-0-1
	Memory Selector G206 Schematic diagram for the Memory Selector G206 circuit.	6206-0-1
	Memory Selector G2J9 This document is a technical schematic for the G2J9 Memory Selector circuit.	A-PL-6219-0-0
	Memory Selector Schematic Schematic diagram for the G221 Memory Selector unit.	G221-0-1
	Memory Selector 206 Transistor and Diode Conversion Chart This document is a transistor and diode conversion chart for the Memory Selector 206 unit.	A-PL-G206-0-0
	Memory Selector Matrix G604 This document is a technical schematic diagram for the Memory Selector Matrix G604.	CS-B-G604
	Memory Selector Matrix G604 This document is a technical schematic diagram for the G604 Memory Selector Matrix.	CS-B-G604
	Memory Selector Matrix Memory Selector Matrix Schematic diagram for the RS-B-G603 Memory Selector Matrix.	RS-B-G603
	Memory Upgrade Print Set A field maintenance print set for the MS400 memory upgrade option.	MP-02430-01
	Memory Word Driver Schematic diagram for the G217 Memory Word Driver circuit board.	G217-0-1
	Memory Word Driver This document contains the engineering schematic for the G217 Memory Word Driver circuit.	G217-0-1
	MI8-E Hardware Bootstrap Loader Engineering Drawings Engineering documentation and drawings for the MI8-E Bootstrap Loader used in PDP-8/E computer systems.	M847-0-1
	mi8e-bootstrap-loader-schematic	XX-BF9CD-CC
	Microprocessor Development System Operating Guide This document is an operating guide for the MPS Microprocessor Development System, covering hardware, installation, and programming.	EK-MPSOP-OP
	Microprocessor Series Modules User Guide This document provides an overview and technical description of Digital's Microprocessor Series (MPS) modules, including the CPU, memory, event detection, and control panel modules.	EA-04271-75
	Millennium II RAM Expansion Module Installation Guide Instructions for installing the RAM expansion module onto the Millennium II graphics option module.	EK-MATRX-UI
	ML200 PCI NVRAM Installation Information This document provides instructions for installing the ML200 PCI NVRAM module in an Alpha AXP system and details battery management.	EK-ML200-IN
	Module Utilization This document provides a comprehensive lookup table for Digital Equipment Corporation modules, listing their functional roles and utilization across various systems.	8I-0-17
	Module Utilization This document provides a module utilization reference chart for the D-MU-8L-0-18 system.	D-MU-8L-0-18
	Motion and Selection Circuit This document is a technical schematic for the Motion and Selection Circuit G853, dated 1967.	G853-0-I
	Motion and Selection Circuit Schematic diagram for the G853 Motion and Selection Circuit.	G853-0-I
	Mounting procedure for DEIAP-WM (RoamAbout Wall Mount Kit)	90-96020-01
	MS11-B MOS Memory Engineering Drawings Engineering drawings for the MS11-B MOS Memory system for the PDP-11.	MS11-B
	MS7AA-FA Memory Module Service Guide Service procedures for identifying and replacing failing SIMMs in the MS7AA-FA 2-gigabyte memory module for VAX 7000/10000 and DEC 7000/10000 systems.	EK-MS7AA-SV.A01
	MS88-CA Memory Array Module	EK-MS88C-MI
	Multi-Purpose Source Type K731 The K731 is a K-series multi-purpose module providing DC power and specialized control signals for control systems.	K731
	Multioptionkarte mit zwei V24/RS232C Schnittstellen Multioptionkarte Technical manual for the MICO Multioptionkarte, an OMNIBUS interface board for PDP-8 computers providing two serial V24/RS232C ports.	N/A
	Multiplex Transistor and Diode Conversion Chart Schematic diagram for the Multiplex circuit featuring a transistor and diode conversion chart.	A131-0-1
	Multiplexer Switches Series A Technical data sheet for A-Series multiplexer switches (types A100, A103, and A121) including control/signal specifications and operational descriptions.	A-SERIES
	NAND Gate R121 This document provides a circuit schematic for the R121 NAND gate.	R121-0-1
	NAND Gates M133 The M133 module provides ten 2-input NAND gates for high-speed gating applications.	M133-1
	NAND Gates Module Technical specifications for the M135 module containing eight high-speed 3-input NAND gates.	M135-1
	NAND/NOR Gate Technical specifications and logic design for the R113 NAND/NOR gate module.	R113-20.00
	NAND/NOR Gates Types B113, B115, B117, B171 B Series Technical specifications for B-series NAND/NOR logic gates including types B113, B115, B117, and B171.	B-SERIES
	Negative Bus Converter Schematic diagram for the Digital Equipment Corporation Negative Bus Converter.	M531-0-1
	Negative Bus Converter Schematic This document provides a schematic for the M531-0-1 Negative Bus Converter module.	M531-0-1
	Negative Input Converter M502 Schematic diagram for the M502 Negative Input Converter circuit, intended for test and maintenance purposes.	M502-0-1
	Negative Input Converter M502 This document is a schematic diagram for the M502 Negative Input Converter module produced by Digital Equipment Corporation in 1967.	M502
	Negative Input Converter M506 This document is a schematic diagram for the M506 Negative Input Converter.	M506-0-1
	Negative Input Converter M506 Maintenance guide This document is a technical schematic for the M506 negative input converter.	M506-0-1
	Negative Level Amplifier W600 Revision B Schematic diagram and parts list for the W600 negative level amplifier.	W600-0-1
	Negative Output Converter Schematic diagram for the M650 negative output converter module.	M650-0-1
	Negative Output Converter This document is a technical schematic for the M650 Negative Output Converter, dated 1967.	M650-0-1
	Negative Output Converter Circuit Schematic This document is a technical circuit schematic for the M651-0-1 Negative Output Converter.	M651-0-1
	Negative Output Converter Negative Level Amplifier The W600 is a series of three inverting amplifiers designed to convert standard signal levels to ground and an externally supplied negative voltage.	W600
	Negative Output Converter Transistor and Diode Conversion Chart This document is a technical schematic and parts list for the M651-0-1 negative output converter circuit.	M651-0-1
	Negative Regulator G805 This document is a schematic diagram for the G805 negative voltage regulator.	G805-0-I
	NOR / NAND Gate R Series Technical specification for the Type R122 NOR/NAND gate from the R series modules.	R122
	Nor Gate M112 This document is a schematic diagram for the NOR Gate M112 module from Digital Equipment Corporation.	M112-0-1
	NVRAM Module (PMTNV-AA) Owner's Guide This guide provides information on the PMTNV-AA NVRAM TURBOchannel module, including its description, testing procedures, and battery specifications.	EK-TNVRM-OG.A01
	NVRAM Module (PMTNV-AA) Owner's Guide This guide provides information on the description, testing, and battery specifications for the NVRAM TURBOchannel module (PMTNV-AA).	EK-TNVRM-OG.A01
	Once Only Code - Operator Dialogue And Service Rout. Linkage	XX-6C243-6F
	One Shot Delay B301 Schematic diagram for the B301 One Shot Delay circuit.	B301-0-1
	One Shot Delay Maintenance Guide Schematic diagram for the Digital Equipment Corporation One Shot Delay M302.	M302-0-1
	One Shot Delay Schematic This document is a technical schematic for the M304 One Shot Delay module, providing circuit details, component specifications, and pinout information.	M304-0-1
	One Shot Delay Schematic This document provides the schematic diagram and parts list for the M302 One Shot Delay module.	M302-0-1
	One Shot Delay Schematic This document provides a schematic for the M304 One Shot Delay module, intended for test and maintenance purposes.	M304-0-1
	ONE SHOT DELAY B301 This document is a technical schematic for the One Shot Delay B301 circuit board, dated June 1964.	B301-0-1
	Operational Amplifier Technical specification sheet for the A200 series operational amplifier.	A200
	Option Board 1 Option Board Technical schematic documentation for the M8316 Option Board #1, including component substitution and switch settings.	M8316-0-1
	Option Harness An engineering drawing of an option harness cable assembly.	EP-0009535-0-0
	Option/Module Hardware List	XX-03AF7-67
	Parity Checkers and Gates Schematic diagram for the MI30 Parity Checkers and Gates module.	MI30-0-1
	Parity Checkers and Gates Schematic diagram for the MI30 parity checker and gate logic module.	MI30-0-1
	Parity Circuit The M182 module is a parity detector containing two high-speed circuits to determine odd or even parity for binary data.	M182-1
	Parity Circuit M162 The M162 module is a parity detector designed to indicate whether binary data contains an odd or even number of 1s.	15-0162
	Parity Circuit MI62 This document is a schematic diagram for the Parity Circuit MI62, dated April 18, 1967.	MI62-0-0
	Parity Control MFI1-LP This document consists of the electrical engineering schematic drawings for the MFI1-LP parity control unit.	CS-M7259-0-1
	Parity Module This document contains engineering schematics and parts lists for the Parity Module.	DCS-M7850-0-1
	PBXGB–AA/CA PCI Graphics Option Owner’s Guide This guide covers the installation, configuration, and specifications for the PBXGB–AA and PBXGB–CA PCI graphics option modules.	EK–PCIGR–OG
	PDP.9	XX-3DAA0-90
	PDP.9	XX-38D61-63
	Peak Detector This document provides a schematic diagram for the Peak Detector G062 circuit.	G062-0-1
	Peak Detector G062-0-1 This document is a technical schematic for the G062 peak detector circuit.	G062-0-1
	Phase-Lock Clock Technical specification for the M420 Phase-Lock Clock used in RP15 Disk Pack Control.	M420-1
	Photo Mod Clock Module The M402 is an RC-coupled multivibrator module providing adjustable 100-ns timing pulses for digital systems.	M402-1
	Photo Transistor Amplifier Schematic diagram for the G918 photo transistor amplifier circuit.	G918-0-1
	Photon-Coupled Trigger W Series Technical specification for the W502 Photon-Coupled Trigger interface module.	W502
	Pilot Circuit Converters K Series Technical data and application information for K-Series pilot circuit converter modules K508, K604, and K716.	413-414
	Plotter Control Schematic diagram for the M704 Plotter Control circuit.	CS-M704-0-1
	Positive Level Driver This document is a schematic diagram for the M660 positive level driver module.	M660-0-1
	Positive Bus Receiver M516 Schematic and parts list for the Positive Bus Receiver M516, published in 1968.	M516-0-1
	Positive Bus Receiver M516 This document provides a schematic and parts list for the Positive Bus Receiver M516, manufactured by Digital Equipment Corporation in 1968.	M516-0-1
	Positive I/O Bus Interface Schematic diagrams and parts list for the Positive I/O Bus Interface module.	M8350-0
	Positive Level Converter W510 Schematic diagram for the Positive Level Converter W510 printed circuit board.	W510-0-1
	Positive Level Driver M660 This document is a schematic diagram for the Digital Equipment Corporation Positive Level Driver, model M660.	M660-0-1
	Positive Level Driver M661 This document is a schematic diagram for the M661 Positive Level Driver circuit.	M661-0-1
	Positive Level Driver M661 Schematic diagram and parts list for the M661 Positive Level Driver module.	M661-0-1
	Positive Level to DEC W591 Schematic diagram for the W591 positive level to DEC converter module.	W591-0-1
	Positive Level to DEC Level Receiver This document is a technical schematic for the W591 Positive Level to DEC Level Receiver module.	W591-0-1
	Power Amplifier Module Module M627 Schematic diagram for the Digital Equipment Corporation Power Amplifier Module M627.	M627-0-1
	Power Amplifier Module Module M627 Schematic and parts list for the Digital Equipment Corporation Power Amplifier Module M627.	M627-0-1
	Power Jumpers Wiring Accessories This document specifies Type 914 power jumper cables designed for interconnecting power supplies, mounting panels, and logic labs.	TYPE 914
	Power Sequence Delays and Decoder G827 This document provides a schematic and physical layout for the G827 Power Sequence Delays and Decoder board.	G827-0-1
	PowerStorm 1000 Graphics Assembly Illustrated Parts Breakdown This document provides an illustrated parts breakdown for the PowerStorm 1000 Graphics Assembly, including module locations and part identification.	EK-P1000-IP.A01
	PowerStorm 1000 Graphics Subsystem Owner's Guide This guide covers installation, troubleshooting, upgrading, and maintenance for the DIGITAL PowerStorm 1000 graphics subsystem.	EK-PS5DT-OG
	PowerStorm 1000 Texture Memory Installation Procedure Installation procedure for adding optional texture memory modules to the PowerStorm 1000 graphics subsystem.	EK-PS5DT-IG
	PowerStorm 1000 Upgrade Information Information on available upgrade options for PowerStorm 1000 graphics subsystems.	EK-PS5DT-UI
	PowerStorm 300 Graphics Controller Option Important: Read This First Installation instructions for attaching a ferrite bead to a monitor video cable for the PowerStorm 300 Graphics Controller.	EK-PS3GO-IG
	PowerStorm 4D40T/4D50T/4D51T/4D60T Graphics Options Owner's Guide Owner's Guide This guide provides installation, technical, and maintenance information for the DIGITAL PowerStorm 4D40T, 4D50T, 4D51T, and 4D60T graphics accelerator modules.	EK–CEYES–OG
	Protection Comparator Circuit This document is an electrical schematic for the B198 protection comparator circuit board.	B198-0-1
	PROTECTION COMPARATOR B198 This document is a circuit schematic for the B198 Protection Comparator, detailing logic gates, transistors, and components used.	CS 8198-0-1
	Pulse Amplifier This document is a technical schematic for a Pulse Amplifier circuit manufactured by Digital Equipment Corporation.	W612-YA-1
	Pulse Amplifier Schematic diagram and parts list for a pulse amplifier circuit.	W612-YA-1
	Pulse Amplifier Schematic diagram for the R603 Pulse Amplifier module.	CS-B-R603
	Pulse Amplifier This document is a schematic diagram for the Pulse Amplifier S603.	S603-0-I
	Pulse Amplifier This document provides a schematic diagram for the Pulse Amplifier R602.	R602-0-I
	Pulse Amplifier Schematic diagram for the Digital Equipment Corporation Pulse Amplifier S602, dated 1965.	S602-0-I
	Pulse Amplifier S603 Schematic diagram for the S603 Pulse Amplifier.	S603-0-1
	Pulse Amplifier Maintenance Guide Schematic diagram for the R613 Pulse Amplifier module for test and maintenance purposes.	R613-0-1
	Pulse Amplifier R601 This document is a schematic diagram for the R601 pulse amplifier module, dated September 1964.	R601-0-I
	Pulse Amplifier Schematic Schematic diagram for the S602 pulse amplifier circuit.	S602-0-I
	Pulse Amplifier Schematic This document is a technical schematic for the R613 Pulse Amplifier circuit.	R613-0-1
	Pulse Amplifier W640 This document provides a schematic diagram for the W640 Pulse Amplifier manufactured by Digital Equipment Corporation.	W640-0-1
	PULSE AMPLIFIER B611 Schematic diagram for the Digital Equipment Corporation Pulse Amplifier B611.	B611-0-1
	Pulse Amplifier B611 Schematic diagram for the B611 Pulse Amplifier.	B611-0-1
	Pulse Amplifier R603 Schematic diagram for the R603 Pulse Amplifier module.	CS-B-R603
	Pulse Amplifier W607 This is a schematic diagram for the W607 Pulse Amplifier circuit, dated 1964, intended for test and maintenance purposes.	W607-0-1
	Pulse Amplifiers Types R602, R603 Technical data and specifications for the R602 and R603 pulse amplifiers, detailing input/output characteristics, power requirements, and signal mixing capabilities.	R602/R603
	Pulse Generator Schematic This document is a schematic diagram for the M602 Pulse Generator, intended for test and maintenance purposes.	M602-0-1
	Pulse Generators M606 The M606 is a module containing six independent pulse generators with inhibit gates for TTL level control applications.	M606-1
	Pulsed Bus Transceiver This document provides the circuit schematic for the W102 Pulsed Bus Transceiver module.	W102-0-1
	Pulsed Bus Transceiver W102 This document is a technical schematic for the Pulsed Bus Transceiver W102.	WI02-0-1
	Punch Control Schematic diagram for the M710 punch control circuit board.	M710
	Punch Control This is a technical schematic document for the M710 punch control board.	M710-0-1
	Quadraflop Electrical schematic diagram for the RS-C-S284 Quadraflop circuit component.	RS-C-S284
	Quadruple Flip-Flop B Series Technical specifications and operation details for the B204 Quadruple Flip-Flop module.	B204
	Quadruple Flip-Flop R Series Technical specification sheet for the R204 Quadruple Flip-Flop module in the R Series.	R204
	R-S Flip-Flops M240 Technical specification for the M240 module, which contains six R-S-type flip-flops.	M240-1
	Rainbow 100 Field Maintenance Print Set Field Maintenance Print Set This document contains the field maintenance print set for the Digital Equipment Corporation Rainbow 100 computer.	MP-01722-01
	Rainbow Graphics Card A comprehensive set of technical schematic diagrams for the Rainbow Graphics Card, covering memory, control, timing, and video output.	N/A
	Rawhide Bus Spec	XX-81A60-0E
	Read Amplifier Technical engineering schematic for a Read Amplifier circuit.	6050-0-1
	Read Amplifier Schematic Technical schematic document for the G050 Read Amplifier module.	6050-0-1
	Read Buffer This document provides the schematic diagram for the M765 Read Buffer module.	M765-0-I
	Read Buffer This document is a technical schematic for the Read Buffer module, part number M765-0.	M765-0
	Read Write Driver G223 This document provides schematic diagrams and component layouts for the G223 Read/Write Driver circuit board.	G223-0-1
	Read/Write and Servo Circuit Diagrams Technical circuit schematics for the read/write and servo control board.	CSM7761-0-1
	Read/Write Board Technical parts list and schematics for the Digital Equipment Corporation Read/Write Board.	5411844-0-0
	Read/Write Board Technical parts list and schematics for a Read/Write Board assembly.	5413536-0-0
	Reader Clock A schematic diagram for the M715 Reader Clock circuit board.	M715-C-1
	Reader Clock Schematic This document is a technical schematic for the Digital Equipment Corporation M715 Reader Clock.	M715-C-1
	Reader Control Schematic for a reader control circuit, likely for a tape or card reader.	M7050-0-1
	Reader Control A logic diagram detailing the controller circuit for a reader device, specifying IC types and component configurations.	C-CS-M705-0-1
	Reader Control Schematic diagram for Reader Control circuitry, document number M7050-0-1.	M7050-0-1
	Real-Time Interface for the Professional 300 Series This document provides an overview and technical specifications for the Real-Time Interface (RTI) module for the Professional 300 Series workstations.	ED-26645-61
	Rectifying Slicer Schematic W533-0-1 This document provides the circuit schematic for the W533 Rectifying Slicer, a component designed for test and maintenance purposes.	W533-0-1
	Reed Clock This document is a technical schematic for the Reed Clock M410.	M410-0-1
	Reed Clock M410 Schematic diagram for the Reed Clock M410, including a parts list and transistor/diode conversion chart.	M410-0-1
	Reel Motor Amplifier Schematic diagram for the G933 Reel Motor Amplifier.	G933-0-1
	Reel Motor Amplifier Schematic diagram for a Reel Motor Amplifier (G933).	G933-0-1
	Relay B Schematic diagram for the W808 Relay board.	W808-0-I
	Relay Driver W Series Technical specifications for the W061 relay driver, designed for driving relays and solenoids.	W061
	Relay G851 Schematic diagram for the G851 relay circuit, including connection mappings and technical specifications.	G851-0-I
	Relay G851 Schematic This document contains the schematic diagram for the Relay G851 unit, intended for test and maintenance purposes.	G851-0-1
	Relay Multiplexer The W802 is a double-height module containing eight double-pole, normally open reed relays for signal multiplexing and memory line addressing.	W802
	Relay W800 This document is a technical circuit schematic for the W800 relay, intended for test and maintenance purposes.	W800-0-1
	Relay W808 Revision B Schematic diagram for the W808 relay circuit used for test and maintenance purposes.	W808-0-1
	Resistor Board G624 Schematic diagram for the Digital Equipment Corporation G624 Resistor Board.	G624-0-I
	Resistor Board G624 Schematic diagram for the Digital Equipment Corporation G624 Resistor Board.	G624-0-1
	Resistor Board G626 Schematic diagram for the G626 Resistor Board including component values and configuration.	G626-0-1
	Resistor Board G626 Schematic diagram for the Resistor Board G626, including component specifications and electrical layout.	G626-0-1
	Resistor Terminator Schematic diagram for the M902-YA resistor terminator module.	M902-YA
	Resistor Terminator Schematic for the Digital Equipment Corporation M902-YB resistor terminator module.	M902-YB
	Resistor Terminator Schematic diagram for the M902-YA resistor terminator board.	M902-YA-1
	Resistor Terminator Schematic diagram for the M902-YB resistor terminator module.	M902-YB
	Retentive Memory Technical specification for the K273 retentive memory double-thickness module for the K Series.	K273
	RFI Shield M849 This document is a schematic diagram for the M849 RFI shield.	M849-0-1
	RH70 Option Description	CSS-MO-F-5.2-2
	RISC Family Performance Summary	XX-19713-B5
	RK8-E Control This document contains engineering logic schematics for the RK8-E Control unit.	CS-M7106-0-1
	rlv12	XX-5F908-55
	RRDCD Installation Card Installation instructions for adding a second RRDCD CD-ROM tray to a Compaq AlphaServer GS60E system.	EK-RRDXX-IN
	RS-B-G208 Inhibit Driver Schematic diagram for the RS-B-G208 Inhibit Driver circuit.	RS-B-G208
	S.C.R. Motor Driver This document is a schematic diagram for the G850 S.C.R. Motor Driver circuit.	G850-0-I
	S.C.R. Motor Driver G850 Schematic diagram for the G850 Silicon Controlled Rectifier (S.C.R.) Motor Driver.	G850-0-I
	Sample and Hold Circuit This document contains the schematic diagram and parts list for a sample and hold electronic circuit, A404.	A404-0-1
	SC01-E Visidyne Microfiche Viewer Parts	90-09165-00
	Schmitt Trigger M503 Schematic diagram for the M503 Schmitt Trigger circuit by Digital Equipment Corporation.	M503-0-1
	Schmitt Trigger M501 Schematic diagram for the M501 Schmitt Trigger circuit module.	M501-0-1
	Schmitt Trigger M501 This document provides a schematic diagram and parts list for the Digital Equipment Corporation Schmitt Trigger M501 circuit.	M501-0-1
	Schmitt Trigger W501 A-PL-W501-0-0 Schematic diagram for the Digital Equipment Corporation Schmitt Trigger W501 module.	A-PL-W501-0-0
	Scope Control Schematic M711 This document is a technical schematic for the Scope Control M711 component, intended for test and maintenance purposes.	M711-C-1
	Scope Intensifier W681 This document provides a schematic diagram for the W681 scope intensifier circuit.	W681-0-1
	Scope Intensifier W68I Schematic Diagram This document is a technical schematic diagram for the Digital Equipment Corporation Scope Intensifier W68I, provided for maintenance and testing purposes.	W68I-0-1
	SCSI Controller Installation Instructions A01 Installation procedures for the SN-KZPCA-AA single channel LVD SCSI controller in Alpha Workstations.	EK-KZPCA-IN
	Selectable Gain Amplifier Technical data sheet for the A222 selectable gain amplifier module.	A222-1
	Selectable Gain Buffer Amplifier Schematic diagram and parts list for a selectable gain buffer amplifier.	A222-0-1
	Sense Amp G020 Schematic diagram for the G020 Sense Amplifier module.	G020-0-1
	Sense Amp and Inhibit Driver G100 Technical schematic for the G100 sense amplifier and inhibit driver circuit.	G100
	Sense Amp Selector Schematic diagram for the Sense Amp Selector GO10.	GO10-0-1
	Sense Amp Selector Schematic for the Sense Amp Selector GO10 circuit board.	GO10-0-1
	Sense Amp. Schematic This document is a technical schematic for the G021 Sense Amplifier, designed by Digital Equipment Corporation in 1967.	G021-0-1
	Sense Amplifier Schematic diagram for the RS-B-G007 Sense Amplifier circuit.	RS-B-G007
	Sense Amplifier Schematic diagram for the Sense Amplifier G021 circuit module.	G021-0-1
	Sense Amplifier G020 Schematic diagram for the G020 Sense Amplifier circuit.	G020-0-1
	Sense Amplifier and Inhibit Driver Technical description of the G100 module, comprising four sense amplifiers and four inhibit drivers for PDP-15 memory stacks.	G100-1
	Sense Inhibit Card Maintenance Guide Schematic diagram for the Sense Inhibit Card G102.	6102-0-1
	Sense Inhibit Card Schematic This document contains the electrical schematic for the DEC G102 Sense Inhibit Card.	6102-0-1
	Series Switch Schematic diagram for the Series Switch G295.	G295-0-1
	Series Switch G285 Schematic diagram and component layout for the G285 series switch.	G285-0-1
	Set-Reset Memory Schematic diagram for the K271 Set-Reset Memory circuit.	K271-0-1
	Signal Cable Connector This is a schematic diagram for the WO11 signal cable connector, produced by Digital Equipment Corporation in 1965.	WO11-0-1
	Signal Cable Connector W011 This schematic provides wiring information for the W011 signal cable connector.	W011-0-1
	Signal Cable Connector W021 A schematic diagram for a ribbon cable signal connector.	B-WO21
	Signal Cable Connector WO21 This document is a technical wiring diagram for a ribbon cable connector, designated WO21.	B-WO21
	Simple Clock Schematic A 1970 schematic document for the M870 Simple Clock circuit used in Digital Equipment Corporation hardware.	M870-0-1
	Slicer Electrical schematic for the G064 Slicer circuit.	G064-0
	Slicer This document is a technical schematic for the Slicer G064 hardware component.	G064-0-1
	Solenoid Driver Schematic diagram for the M040-0-1 Solenoid Driver circuit.	M040-0-1
	Solenoid Driver A schematic diagram for the M040 Solenoid Driver circuit.	M040-0-1
	Solenoid Driver Technical schematic for the W040 Solenoid Driver module, detailing component connections.	CS-B-W040
	Stack Board Technical schematic drawings and parts list for a Stack Board.	H217-0-1
	Stack Limit Register Engineering Drawings Engineering schematics and parts list for the Stack Limit Register (M7237) module.	M7237-0-1
	Star Coupler Field Maintenance Print Set SC008-A Field maintenance documentation and engineering prints for the SC008 Star Coupler system.	MP01370
	Switch Filter W726 This document is a technical schematic for the W726 switch filter used by Digital Equipment Corporation.	W726-0-1
	Switch Filter Type W700 Technical specifications and connection guide for the W700 series switch filter.	W700
	Synchronous 4-Bit Up/Down Converters M238 Schematic diagram for the M238 synchronous 4-bit up/down converter module.	M238-0-1
	Synchronous Modem Interface Maintenance Manual This document provides technical specifications and maintenance information for the DP8 synchronous modem interface.	DP8-E
	Synchronous Modem Interface Module for DS11 This document is a technical engineering drawing for the M7110 synchronous modem interface module.	M7110-0-1
	System Block Diagram	XX-54AB1-8E
	System Management Station Kit Installation Guide Installation guide for the 2T-RMSMC System Management Station Kit in 19-inch metric or English RETMA cabinets.	EK-RMSMC-IN
	TAPPED DELAY LINE B311 This document is a technical schematic for the Digital Equipment Corporation Tapped Delay Line B311.	B311-0-1
	Tapped Delay Line B311 Schematic diagram for the B311 Tapped Delay Line.	B311-0-1
	Tapped Delay Line M321 Schematic Technical schematic document for the M321 Tapped Delay Line, including parts list and conversion charts.	M321-0-1
	Tapped Delay Lines M311 Technical specifications for the M311 module, featuring two tapped delay lines with 25 ns intervals and specific input, output, and power requirements.	M311-1
	TC44-AA/BA STI to StorageTek 4400 ACS Interconnect Hardware Maintenance Manual This document provides troubleshooting and maintenance procedures for the TC44 STI to StorageTek 4400 ACS Interconnect adapter.	EK-TC44I-TM-001
	TC44-AA/BA STI to StorageTek 4400 ACS Interconnect Hardware Maintenance Manual This manual provides maintenance, troubleshooting, and field replacement procedures for the TC44 STI to StorageTek 4400 ACS Interconnect adapter.	EK-TC44I-TM-001
	Telegraph Line Circuit Schematic for the Telegraph Line Circuit G854 by Digital Equipment Corporation.	CS-G854-0-1
	Telegraph Line Circuit 6854 Schematic and parts list for the Telegraph Line Circuit G854 by Digital Equipment Corporation.	CS-G854-0-1
	Teletype Connector Schematic diagram for the Teletype Connector W078 for test and maintenance purposes.	W078-0-1
	Teletype Connector Technical specifications for the G858 Teletype connector module used with the PDP-15.	G858-1
	Teletype Connector W076 Schematic diagram for the Teletype Connector W076.	W076-0-1
	Teletype Connector W076 Equipment Schematic diagram for the W076 Teletype Connector, including component values and typical pin assignments.	W076-0-I
	Teletype Connector W078 This document is a technical schematic for the W078 Teletype Connector, intended for test and maintenance purposes.	W078-0-1
	Teletype Level Converter Conversion Chart Transistor and diode conversion chart for the Teletype level converter module W702.	W702-0-1
	Teletype Level Converter W702 This document is a technical schematic for the Teletype Level Converter W702, illustrating its diode and resistor circuit configuration.	W702-0-1
	Teletype Receiver W706 Schematic Schematic diagram for the Teletype Receiver W706, designed by Digital Equipment Corporation in 1966.	W706-0-I
	Terminated Board W028 This document is a schematic diagram for the W028 terminated board, intended for test and maintenance purposes.	W028-0-1
	Terminated Board W028 This document is a schematic diagram for the W028 terminated board.	W028-0-1
	Terminator Schematic and test procedure for the G715 Terminator circuit module.	G715-0-1
	Terminator This document is a schematic diagram for the G737 termination circuit.	G737-0-1
	Terminator This document is a schematic diagram for the G737 termination circuit board.	G737-0-1
	Terminator Schematic and parts list for the G715 terminator module.	G715-0-1
	Terminator 100 Ohm Schematic diagram for the G700 100-ohm terminator module.	G700-0-1
	Test Probe The Type K791 test probe is a diagnostic tool with pulse-stretching lamp drivers for visual indication of logic states.	K791
	The RZ26B Fixed Disk Drive in the VAXstation 4000 This document provides installation, configuration, and specification information for the RZ26B fixed disk drive for the VAXstation 4000.	EK-RZ26B-IN
	Three-Bit Parity Circuit Technical data sheet for the B130 Three-Bit Parity Circuit logic module.	B130
	Time State Generator Technical specification document for the M775 Time State Generator module, detailing its input, output, and power characteristics for the PDP-15.	M775-1
	Time State Generator Schematic diagram for the M775 Time State Generator module.	M775-0-1
	TLZ06 Cassette Tape Drive Installation Guide Installation manual for the TLZ06 cassette tape drive in VAXstation 4000 series systems and BA46 storage expansion boxes.	EK-STEXP-AD.A01
	Transistor and Diode Conversion Schematic diagram for a transistor and diode conversion board.	G350-0-I
	Transistor and Diode Conversion Chart Schematic diagram and component list for the M663 50 Ohm OR bus driver circuit module.	M663-0-1
	Transistor and Diode Conversion Chart A schematic diagram for a Transistor and Diode Conversion assembly, identified as part of the G350 equipment.	G350-0-1
	Transistor and Diode Conversion Chart Technical schematic and conversion chart for the M663 50 Ohm Bus Driver board.	M663-0-1
	Transistor and Diode Conversion Chart Motion Control Schematic and parts list for the M890-0-1 motion control printed circuit board.	M890-0-1
	Triple Flip-Flop R Series Type R203 Technical specifications and operational details for the R203 Triple Flip-Flop module.	R203
	tsv05 user	EK-TSVO5-UG
	Tuio Compressor Circuit Schematic Schematic diagram for the G060 Tuio Compressor component.	G060-0-1
	Tuio Compressor Schematic Schematic diagram for the G060 Tuio Compressor module.	G060-0-1
	Two Bus Drivers B684 Schematic diagram and parts list for the B684 two bus drivers circuit board.	B684-0-1
	Two Bus Drivers Parts List B684 This document provides a schematic diagram and parts list for the Two Bus Drivers B684 circuit.	C-CS-B684-0-1
	UDA50 Maintenance Guide	AA-MI8EC-TC
	Variable Clock Schematic for the M452 variable clock circuit.	M452-0-1
	Variable Clock Schematic diagram and component layout for the M452 Variable Clock module.	M452-0-1
	Variable Clock This document provides the schematic diagram for the R450 variable clock circuit designed for test and maintenance purposes.	R450-0-1
	Variable Clock Schematic for the R450 variable clock module.	R450-0-1
	Variable Clock R Series Type R401 Technical specifications and operation details for the R401 Variable Clock module.	R401
	Variable Clock M401 Schematic diagram for the M401 Variable Clock module.	M401-0-1
	Variable Clock M401 Technical schematic diagram for the Digital Equipment Corporation Variable Clock M401 module.	M401-0-1
	Variable Clock R451 Schematic diagram for the R451 Variable Clock component.	R451-0-1
	Variable Delay M360 Schematic diagram for the M360 variable delay circuit, including parts list and component conversion chart.	M360-0-1
	Variable Delay Schematic Technical schematic document for the M363 variable delay module.	M363-0-1
	VARIABLE DELAY LINE B312-0-1 This document is a technical schematic for a 1966 Digital Equipment Corporation variable delay line circuit designed for test and maintenance purposes.	B312-0-1
	Variable Delay Line B312 This document provides the schematic diagram for the B312 variable delay line module.	B312-0-1
	Variable Delay M360 Schematic Schematic diagram and parts list for the Variable Delay M360 circuit.	M360-0-1
	VAXimage Scanning Subsystem MD300 The MD300 VAXimage Scanning Subsystem allows for efficient capture, manipulation, and integration of paper-based images into Digital computer systems.	ED-32714-49
	VFO Clock Schematic diagram for the Digital Equipment Corporation VFO Clock B410, dated 1969.	B410-0-1
	VFO CLOCK B410 This document is a technical schematic for the VFO Clock B410 circuit.	B410-0-1
	VP10 Point Plot Display Control Maintenance Manual Technical maintenance manual for the VP10 Point Plot Display Control, an peripheral device for the PDP-10 computer system.	DEC-10-H6AB-D
	VS11 Field Maintenance Print Set This document contains the drawing directory, unit assemblies, parts lists, and interconnection diagrams for the VS11 display system.	MP-1102
	VSV11/VS11 Raster Graphics System Option Description This document describes the VSV11/VS11 video graphics system, including its hardware components, installation procedures, and programming reference.	YM-C183C-OO
	VSV21 Pocket Service Guide Version 2.0 Service and maintenance guide for the VSV21 high-functionality graphics control module.	EK-VSV21-PSG-003
	VSV21 Peripheral Concentrator User/Installation Guide This user and installation guide provides comprehensive instructions for setting up and operating the VSV21 Peripheral Concentrator option.	EK-VSV21-UM-001
	VT340 Video Terminal	EK-VT340-IP
	VTØ5B Unit Assembly	CUA VT05B-00-00
	W076B Teletype Connector Schematic diagram for the W076B Teletype connector interface.	W076B
	W714 Switches Technical information regarding the bank selection switches located on the W714 module.	W714-1
	W800 Relay Technical specification and wiring instructions for the Type W800 reed relay.	W800
	Wire List This document provides a detailed wire list for a Digital Equipment Corporation system, including run names, pin details, and signal routing.	K-WL-AAII-D-WL
	Wire List Tape # A detailed wire list document for the MMI1-E hardware configuration.	K-WL-MMI1-E-07
	Wiring Accessories Hardware Accessories Information and pricing for 913 patchcords, 932 bus strips, H820 grip clips, and the H825 crimping tool.	244
	Word Drive Stack Connector Schematic diagram for the Word Drive Stack Connector W017, designed by Digital Equipment Corporation in 1966.	WO17-0-1
	Word Sink Stack Connector This document is a schematic diagram for the Word Sink Stack Connector (WO13), intended for test and maintenance purposes.	WO13-0-I
	Word Sink Stack Connector WO13 Schematic diagram for the Word Sink Stack Connector WO13.	WO13-0-1
	Write Buffer This document is a schematic diagram for the M763 Write Buffer module by Digital Equipment Corporation.	M763-0-1
	Write Buffer M763 This document is a technical schematic for the Digital Equipment Corporation Write Buffer module, model M763.	M763-U-1
	Write Driver Schematic diagram for the G287 Write Driver circuit.	G287-0-1
	X and Y Current Generator This document is a technical schematic for the X and Y Current Generator module.	6230-0-V
	X and Y Current Generator Schematic diagram for the G230 X and Y Current Generator.	6230-0
	X Diode Matrix Technical schematic and conversion chart for the G613 X Diode Matrix.	G613-2
	X-Y Decoder Switch This document contains a schematic diagram and parts list for the X-Y Decoder Switch.	D-CS-6226-0-1
	X-Y Decoder Switch Schematic diagram for an X-Y Decoder Switch module.	CS-6226-0-1
	XFA Port Specification Rev 4.3 199212	XX-EA4EC-68
	XMI Adapters Handbook Documentation Set Overview and Maintenance Guide This document provides technical information and diagnostic procedures for the XMI Bus, the CIXD interface, and the DEMNA Ethernet controller.	EK-XMIAD-HB
	XMI CVAX Rigel Memory Interconnect Rev 0.9 198506	XX-077E6-C3
	XY-Control Schematic This document is a technical schematic for the G917 XY-Control component by Digital Equipment Corporation.	G917-0-1
	Y Diode Matrix Technical schematic for the Y Diode Matrix (G614) circuit board.	G614-0-1
	Y Diode Matrix G614 The G614 module is an 8 x 8 two-way crosspoint switching matrix consisting of 256 diodes.	G614-1
	ZLX Graphics Accelerator Modules Owner's Guide Owner's guide for the ZLX-L1 and ZLX-L2 graphics accelerator modules, detailing setup, installation, and troubleshooting.	EK-PIXEL-OG.C01
	ZLX Smart Frame Buffer Owner's Manual Errata Information This document provides errata and updates for the ZLX Smart Frame Buffer Owner's Manual, covering switch settings, cable information, and module dimensions.	EK-SMFBP-ES
	ZLX-L1 and ZLX-L2 Graphics Accelerator Modules Owner's Guide This guide covers the description, installation, configuration, and troubleshooting of ZLX-L1 and ZLX-L2 graphics accelerator modules.	EK-GAZLX-OG
	ZLXp-E1/E2/E3 PCI Graphics Options Owner's Guide An owner's guide for the ZLXp-E1/E2/E3 PCI graphics options, covering installation, configuration, and specifications.	EK-T2424-OG
	ZLXp-L1 and ZLXp-L2 PCI Graphics Options Owner's Guide This guide provides installation, configuration, and troubleshooting information for the ZLXp-L1 and ZLXp-L2 PCI graphics modules on Windows NT systems.	EK-PVPCI-OG

855 documents